Installation Guide

www.lesscare.com

ULTRA-D

SHOWER ENCLOSURES

INSTALLATION STEPS

Figure 10

10. Place the Stationary Glass Assembly on the preinstalled shower base or threshold and butt it up against the wall. Tempo-

rarily fasten the Upper Guide Rail (4) to the Return Panel Glass(22) with the Glass Connector (21). Slightly tighten the set

screws.

Make sure the Stationary Glass (14) and the Upper Guide Rail (4) are leveled. Slide the Guide Rail Bracket (2) against the wall,

outline the Guide Rail Brackets (2) position one the wall.

Outline the position of the Bottom Mount Clamp (23) on the shower base.

Disassemble the Upper Guide Rail from the Return Panel Glass, set the Stationary Glass Assembly aside.

Remove the Guide Rail Bracket from the Stationary Glass and place it back to the outlined position, now mark the dri dlling

hole on the wall.

Remove the Clamp on the Stationary Glass and place it backto the outlined position on the shower base or threshold, now

mark the drill hole on the shower base or threshold.

Please see Fig 10 ,11 for details.

Outside