Installation Guide

www.lesscare.com
ULTRA-E
SHOWER DOORS
INSTALLATION STEPS
11
8. Push the Fixed Glass installed with profiles against the wall, align the Fixed Glass (10) with the Glass Door (4) and
level it. Maket sure the gap between the fixed glass and glass door. If needed adjust the position of the Fixed Glass by
pulling out the fixed glass with glass profile from the slot of the Wall Profile or push the fixed glass with glass profile to
the slot of the wall profile to make sure the Anti-water strips work well.
See Fig. 8 for details.
a.
b.
c.
d.
Note: The fixed panel width can be adjusted
by increasing or reducing the overlap
between the glass profile and wall profile,
there will be around 1" adjustment.
Example:
Min W=8”
Max W=8”+1”=9”
Figure 8
6
4
4
10
10
4
10