Installation Guide

www.lesscare.com
ULTRA-E
SHOWER DOORS
INSTALLATION STEPS
8
a.
b.
c.
d.
4. Hold the door in place and mark down the drill holes for both Hinges (1) on the wall. Set the door aside and
drill the holes in the wall using Ø8mm(Ø5/16") drill bit. Apply silicone into the holes on the wall and insert the
wall anchors (6)
ATTENTION:
This door is extremely heavy and the hinges on this door must be attached to the studs or to preinstalled 2 × 4
wood reinforcement behind the wall.
Figure 4
1
6