Installation Guide

www.lesscare.com

ULTRA-G

SHOWER DOORS • SHOWER ENCLOSURES

Apply silicone sealant between the wall and the pivot

bracket. Also, apply silicone between the wall and the wall

profiles from outside(bathroom), from inside (shower),

and hole in lower pivot body.

See Figure 14 for details

Open then door 90º and you will see a hole

beneath the Pivot body (5C). This step is not

required. You may optionally drill a hole through

the Pivot body (5C) hole directly into your

threshold. Apply silicone in the drilled hole, insert,

and screw in Countersunk Screw M4x40 (15).

Apply silicone on top of the screw head.

See Figure 13 for details.

8. Apply Silicone

This step is optional

MUST ALLOW SILICONE TO DRY FOR 24 HOURS

BEFORE STARTING USING THE SHOWER

Figure 14

Figure 13

INSTALLATION STEPS