Installation Guide

www.lesscare.com
ULTRA-G
SHOWER DOORS • SHOWER ENCLOSURES
INSTALLATION STEPS
6
Single Shower Door Assembly
and Installation
NOTE: Use parts from Diagram A for Single
Shower door assembly and installation.
1.1 Place the Wall Profile For Glass Door (1) vertically against the wall
and set it to the shower base or the threshold.
Using a level to level the wall profile upright mark 7 pre-drilled holes on
the wall, using a pencil or marker, to prepare for drilling.
Now, drill 7 holes in the wall using 8mm (5/16") Drill Bit. Apply silicone
into the holes on the wall. Insert seven 8mm (5/16") Wall anchors (13)
and hammer them in.
See Figure 1 for details
b
a
c
d
Figure 1
1. Wall profile and Pivot retainers installation
Shower Base
1
1
13
+0.0
Installation requires
minimum of 2" x 4"
wood stud framing
behind the wall.