Installation Guide

www.lesscare.com
ULTRA-G
SHOWER DOORS • SHOWER ENCLOSURES
7
1.3 Secure the Wall Profile For Glass Door (1)
with both Pivot Retainers (4A/5A) and middle
section to the wall together by using 7 Round
Head Screws M5x60 (12).
See Figure 3 for details
1.2 Insert Upper Pivot Retainer (4A) and Lower Pivot Retainer (5A)
into both ends of the Wall Profile For Glass Door (1). Apply silicone from
top to bottom along the back edge (edge facing the wall) of Wall profile
for glass door (1)
See Figure 2 for details
Figure 2
Figure 3
INSTALLATION STEPS
a c
d
4A
1
1
5A
b
12
Bottom
b
12
Top
a
12
Middle
c
1
OUTSIDE (BATHROOM)
TOP VIEW
INSIDE (SHOWER)
WALL
NOTE: Wall Profile For Glass Door (1) must
be attached to the wall with the rounded edge
facing outside (bathroom).
e