Installation Guide

www.lesscare.com
ULTRA-B
TUB DOORS • SHOWER DOORS
INSTALLATION STEPS
17. Install the two Safety Pin (5) to the Glass Door (7). The roller is off-centre, adjust the roller to make the glass door move
higher or lower and make sure that the glass door will not rub against the guide block (13) and ensure the bumper strip to push
against the wall.
IMPORTANT: Make sure that clear rubber Gaskets are in between the Glass Door. Then, fasten tightly the Screws. Make sure
parts are in the right position. Do not let any metal parts come into contact directly with glass,which will damage the glass
notches and cause scratches or damage to the glass .If ignored, could result in serious injury or death.
See Figure 18 for details.
a
c d
b
Figure 18
R
R
R
R
R
23