Installation & Assembly

www.lesscare.com
INSTALLATION INSTRUCTIONS
LK5B
KITCHEN FAUCET
Maintenance Your new faucet is designed for trouble-free performance. Keep it looking new by
cleaning it periodically with a soft cloth. Avoid abrasive cleaners, steel wool and harsh chemicals as these
will dull the finish and void your warranty.
Locate water supply inlet and shut off water supply
valve.These are usually found under the sink or near
the water heater. Remove old faucet. Clean and dry sink
surface area where new faucet will be mounted.
Connect hose with the washer to outlet tube and
tighten. Do not overtighten. Install weight onto spray
hose.
Important: After installation is completed, turn on
water supply without the sprayer. Allow water to run
for at least one minute both hot and cold positions.
Assemble the spray head to the pull-out hose by
turning spray head clockwise.
WARNING: MAKE SURE THAT GASKET IN THE
OUTLET PORT IS IN PLACE BEFORE ASSEMBLING
THE SPRAY HEAD TO HOSE.
Place the faucet assembly into postion on sink. From
under sink, firmly secure faucet to sink with rubber
washer, metal washer and nut.
6
5
4
3
1
Escutcheon installation is optional.
A.For installation with deck plate, place base plate and
escutcheon on the sink.
B.For installation without deckplate,use flange to replace
escutcheon and base plate.
2
Connect water supply lines.
(A) Use faucet supply lines or use coupling
nuts (not supplied) with ball-nose risers (not included).
Turn water supply or shut-off valve back on and check
for leaks. If leaks occur, gently tighten the faucet
connections.