Installation Guide
www.lesscare.com
SHOWER BASE TRAYS
MAINTENANCE & CARE
14
To avoid damage and optimize your product, you must follow the below recommendations when maintaining your product
Damages resulting from inappropriate handling are not covered by the warranty
• Rinse with clean water and dry with a so co on cloth or sponge. Do not use anything abrasive such as a scouring brush or
sponge to clean the surfaces
• For tough stains, use a gentle liquid detergent such as dish soap and hot water. Do not use an abrasive and acidic cleaner.
• Carefully read the label on the cleaning product to make sure it is safe and appropriate. Always try the cleaning solution
on a less visible surface before applying it to the rest
• Completely rinse with water immediately after applying the cleaner
• Regular cleaning prevents the accumulation of dirt and tough stains
Retain these installation instructions for future reference!
Thank you for using LessCare products!
IMPORTANT!
DO NOT USE: Abrasive cleaners such as: acid, ammonia, bleach, and simmilar solutions. Use of such solutions may cause
corrosion, finish peeling, and/or dull the surface.
DO NOT USE: Abrasive sponges or cloth. Never use steel, wool, or wired brushes that will permanently scratch the surface.