Installation Guide

www.lesscare.com

SHOWER BASE TRAYS

INSTALLATION METHODS

THREE METHODS TO INSTALL LESSCARE® SHOWER BASE TRAYS:

BEFORE INSTALLATION

• Use the protector printed on the packaging box to protect the bottom of the base during installation

• Cover the drain of the shower so no parts are lost

• Prior to install the shower base, all framing and plumbing work must be completed in accordance with instructions and local codes

• For renovation work, exis ng shower surfaces must be removed to accomodate framing requirements

• To facilitate leveling, it is recommended to apply a layer of mortar on the floor surface where the shower base will be installed

• Clean surfaces with a soft wet cloth before applying any caulking, glue or mortar

Before installation, take the shower base out of the packagingand make sure the base is in good shape.

If there is a problem, report it immediately to the seller!

ALCOVE

Single threshold

installation with

3 tile flanges

WALL CORNER

Double threshold

installation with

2 tile flanges

Aluminum

Tile Flanges

Aluminum

Tile Flanges

WALL

ALCOVE

Shower base tray is installed

against three walls

(for shower doors)

WALL CORNER

Shower base tray is installed

against two walls

(for shower enclosures)

WALL