Owner and manual

www.lesscare.com
ONE PIECE TOILET
TOILET SEAT INSTALLATION
6
5
3
4
2
1
Washer
Screw
Adjustment plate
Hinge
Seat cover
Nut
W.C Bowl
6
LT2T
1.Fit the screw through the adjustment plate,then put the adjust-
mentplate into the hinge
2.
Place the assembly onto the toilet and push the screws into the holes.
Make the necessary adjustments to the fittings so that the seat sits correctly
on the toilet. Once correctly positioned fit the washer and nut and secure the
seat.Take care not to overtighten the fittings as doing this can crack the fittings.
Important:
• After installation ensure the fixings are fully secured.
• No abrasive cleaning agents or materials can be used,asoft clean
cloth should be used.
• During use do not push the seat down, as this will cause damage to
the soft close mechanism.