Installation & Assembly

Figure 7

Pin Assembly

for refference

only

www.lesscare.com

LT3

ONE PIECE TOILET

TOILET SEAT ADJUSTMENT

ADJUST SOFT-CLOSE SEAT

If your toilet seat becomes loose or is not properly aligned

to the toilet's bowl and requires adjustment you may

adjust the position of the seat.

1. Press push-to-release buttons in simultaneously with

two thumbs and lift the toilet seat up.

2. Lift the cover cap

3. Using a philips screwdriver make 1-2 turns to loosen

the screw slightly (do not unscrew the screw completly)

4. Put your toilet seat back on to the pins. Close the toilet

seat and align it with the bowl (do not put cover caps in

this step)

5. Carefully lift up the toilet seat so the position of the

toilet seat will not shift. Press push-to-release buttons on

the toilet seat and carefully lift the toilet's seat from the

the top of the pins.

6. Using a philips screwdriver tighten the screws (do not

overtighten the screws.)

7. Put the covers caps back on top of the pins and install

the toilet seat back on top of the pins (push the toilet seat

down while in upright position until you hear a double

click. That means that the toilet seat is fully locked. If you

do not hear double click that means that the toilet seat is

not in lock position with the pins. Repeat the step 7 and

try to use more strength to push it down.)

See Figure 7

Push-to-release

buttons

Cover

Cap

Screw