Manual

3380 N. El Paso St., Colorado Springs, CO 80907

LGT Store-It!

Part No. ACC 3078

User Assembly Manual

Qty Description

2 Caster Assemblies, 90 Degree Flat Plates

(casters, plates, 5/16” x 1” bolts with four washers)

2 Caster Assemblies, 90 Degree Plates with Flanges

(casters, plates, 5/16” x 3/4” bolts with two washers

and 5/16” spring nuts)

6 Bullets

6 Snap plugs

Parts List Overview

Tools Required

2 18mm open end wrenches, or

18 mm open end wrench and socket with ratchet

1 Wire Stripper / Crimper

For upright storage of the LittleGiant trailer™ in garage.

Minimum ceiling height requirement is 7’6” (7’6”H X 72”W X 30”D footprint)

Remove tires, tongue, and endgates for storage.

CAUTION

The trailer body weighs 280 lbs (with tires,

endgates, tongue removed). Use caution while

storing.

Mount to Frame Tubes

Mount to C Channel Track

2120 Naegele Road Colorado Springs, CO 80904

ACC3078rev0614

PAGE 1
LGT Store-It! Part No. ACC 3078 3380 El Paso St., Colorado Springs,Springs, CO 80907 CO 2120N.Naegele Road Colorado User Assembly Manual 80904 For upright storage of the LittleGiant trailer™ in garage. Minimum ceiling height requirement is 7’6” (7’6”H X 72”W X 30”D footprint) Remove tires, tongue, and endgates for storage.
PAGE 2
LittleGiant Trailer™ Store It! Kit Assembly Step 1: Attach Bullets and Snap Plugs and Remove A-frame tongue Right below the side marker lights where the A-frame is attached to the trailer, locate the wires coming out of the A-frame. Peel back the conduit and pull about 6” of the wire though the A-frame. Cut and strip the 3 wires. Crimp the Bullets and the Snap plugs. To remove the tongue use an 18 mm wrench and socket to unbolt the 4 bolts holding the tongue to the trailer body.