F-531 Ring Fill Light User Manual Thank you for purchasing our product. This manual addresses the safety guidelines, warranty, and operating instructions. Please review this manual thoroughly before operating your device.
Contents Package Contents................................................................ 1 At a Glance.......................................................................... 2 Installation Guide................................................................. 5 Using Your Ring Fill Light................................................... 10 Specifications...................................................................... 14 SAFETY AND WARRANTY.................................................
Package Contents ① Ring Fill Light × 1 ⑤ Flexible Phone Holder × 1 ② Tripod Stand × 1 ⑥ Phone Holder × 1 ③ Ball Head A × 1 ⑦ Selfie Remote Control × 1 ④ Ball Head B × 1 ⑧ User Manual × 1 ① ② ③ ④ F-531 Ring Fill Light User Manual Thank you for purchasing our product. This manual addresses the safety guidelines, warranty, and operating instructions. Please review this manual thoroughly before operating your device.
At a Glance 1. Ring Fill Light USB Connector LED Panel Screw Hole Light Controller 2.
3. Ball Head A Screw 360° Ball Head Ball Head Fastener Screw Hole 4.
5. Flexible Phone Holder Phone Holder Flexible Tube Screw 6.
Installation Guide Installing Ring Fill Light 1. Screw ball head A into the screw hole on the tripod stand. 2. While holding the ring fill light in one hand, screw ball head A into the bottom of the light.
3. Pull out the three legs of the tripod stand and place it on your desk. 4. Loosen the fastener of ball head A, adjust the ring fill light to your desired angle, and then tighten the fastener. Note: Please extend the three legs of the tripod stand as much as possible to ensure its stability.
Installing Phone Holder 1. Screw ball head B into the screw hole on the ring fill light and then screw the phone holder into ball head B. 2. Loosen the fastener of ball head B, adjust the phone holder to your desired angle, and then tighten the fastener.
You can also install your phone on the stand using the flexible phone holder. Screw the flexible phone holder into the screw hole on the ring fill light. Extendable Phone Holders Up to 3.7 inches Up to 3.
End Result 15.
Using Your Ring Fill Light Power on After mounting the ring fill light on the tripod stand, connect the USB connector of the ring fill light to a USB wall charger or computer USB port that is powered on (5V / 2A). Adjust Brightness & Change Lighting Mode Press the power button to turn the light on, press the up / down button to increase / decrease the brightness (10 levels). Press the mode button to change lighting mode (white / natural / warm).
Use Selfie Remote Control Button A (Shutter for iPhones) Battery Cover LED Indicator Power Switch Button B (Shutter for Android Phones) ● Pair 1) Turn on the Bluetooth of your phone. 2) Slide the power switch to ON. The remote control will enter pairing mode (the LED indicator will flash blue). 3) Choose "AB Shutter3" from the list of found Bluetooth devices on your phone to pair.
● Select App You can use the built-in camera app of your phone to take photos with our selfie remote control or you can download "Camera 360" app from Google Play store. Please check the Compatible Devices table for compatible devices and apps. ● Take a Photo / Start Recording When our selfie remote control is successfully paired with your phone, open the camera app, press Button A or Button B on the remote control depending on your phone type to take a photo / start recording.
Compatible Devices Built-in Camera App CA RA ME 3 60 iOS CA iOS RA ME 3 60 Compatible with Android 4.2.2 OS or newer (e.g., Samsung Galaxy S2/S3/S4/S10/S20 5G/S20 Ultra 5G, Samsung Galaxy Note 1/2/3/8/9/10, Moto X, Nexus 4/5/7+, Xiaomi 1S/2S/3+). android CA iOS RA ME 3 60 Sony Xperia S HTC New one and X+ RA ME 3 60 Compatible with iOS 6.0 OS or newer (e.g.
Specifications Specifications (Ring Fill Light) Model Material F-531 ABS+PC Ring Diameter 10.2 inches / 0.26 meters (outer diameter) 8.1 inches / 0.
Specifications (Selfie Remote Control) Model Bluetooth Version Bluetooth Connection Distance AB Shutter3 V4.
SAFETY AND WARRANTY Safety Instructions ● This product must be used with an input power of 5V / 2A, and low power input will reduce the brightness of the ring fill light. ● Do NOT try to dismantle or modify the product. ● Keep this product away from water and any flammable gases or liquids. ● Do NOT repair the product in dangerous places such as gas, steam, etc. It is easy to conduct electricity in a humid environment. ● Do not let any liquid flow into the product, as this may seriously damage the product.
Warranty We strive to build our products with the highest attention to detail and craftsmanship. However, sometimes there are occurrences of defect. We are happy to offer a one-year hassle-free warranty to all our products as we continue to make amazing products. Please contact us if you have any questions about our devices.
