Fitness Tracker User Manual ID115Pro Thank you for purchasing our products. This manual addresses the safety guidelines, warranty and operating instructions. Please review this manual thoroughly before operating your device.
USB Charging Please charge your new device for at least 10 minutes to have it activated before initial use. Insert the charging plug of the host into the USB port for charging. Make sure the pins on the charging plug contact those in the USB port. 2 1 3 The red indicator is on when the device is properly charged. If not, check the direction of the device's charging plug and move to the correct direction, as shown below.
Install and Wear Your Device Install: Plug the host into the slots of each strap. Wear: Wear the device on your wrist horizontally, about 2cm to carpal, the same way as wearing a watch. Smart Phone System Requirement ● iOS 8.0 & above ● Android 4.4 & above ● Bluetooth 4.0 & above Download the APP Download "VeryFitPro" APP for Android and iOS devices. Option 1: Search for "VeryFitPro" in APP store or Google Play and download to your smartphone.
Notes: ● This fitness tracker requires iOS 8.0 & above or Android 4.4 & above system. ● "VeryFitPro" APP is only compatible with smartphones. Option 2: Searching the QR code, scan and download APP. Use the QR code Scan tool to scan the following QR code, open the link and follow the instructions to download APP. Tip: In case of problems when opening the link, copy the link and open it in a browser. iOS Android VeryFitPro Pair the Device 1）Enable Bluetooth before binding the device.
device will be cleared. If the device is unbound under Bluetooth disconnected state, the APP will set the settings back to default, but the data on the device will not be cleared. ● The device can only link to one smartphone at a time. During connecting please confirm there is no other smartphones nearby. ID115Pro Select the device in the smartphone searching list Touch Key After first successful binding, the main screen is as shown on the left.
Note: The screen brightness can be adjusted from Level 1 to Level 5 in "Device"→"More"→"Bracelet brightness" in the APP and Level 5 is the brightest. Remember to click " √ " to save your settings. Main Functions 0 12:45 AM Mon Fri 28 Main Screen Step Mode Heart Rate Mode Walk Run Bike Walk Mode※2 Run Mode Alarm Mode※1 Bike Mode ※1: "Alarm Mode" is displayed on the device screen only when "Alarm Alert" is ON in the APP.
2) Single tap on the touch key to flip through detailed step data. 3) Single tap on the touch key to go to the next mode: Heart Rate Mode. 0 Note: You can go to the APP to set you sports target ("User" →"Target Setting"). When you reach your sport target, the device vibrates and the screen displays: Tap on the touch key to go back to the main screen. Achieve goals 2. Heart Rate Mode After entering the heart rate interface for 1s, the device will start monitoring the heart rate automatically.
Notes: ● Alarm Mode is available only when alarm(s) is/are added and enabled (turn on the switch to enable the alarm) in "Alarm alert" in the APP. ● Tap on the alarm, you can add and set the alarm types, repeat type and time. (When alarm(s) is/are added and enabled, please click " √ " to save your settings.) Get up Go to sleep Exercise Medication Dating Party Meeting 2) Single tap on the touch key to go to the next mode: Walk Mode. 4.
2) Long press the touch key for 2s to quit the walk mode. The following data is displayed after the exercise is ended: 7’5” 4456 23 Min AVG Pace 3 234 90 Steps/MI Min/Kcal AVG Pace/BPM Steps MI Kcal BPM Single tap on the touch key to flip through the exercise data. 3) Single tap on the touch key to go to the next mode: Run Mode. Note: Data of exercises less than 1 minute will not be saved. 5. Run Mode 1) Long press the touch key for 2s to start the run mode.
During exercise, tap on the touch key to flip through the exercise data. 89 4，456 234 3 BPM Steps Kcal MI 23:34:56 23:34:56 23:34:56 23:34:56 BPM Steps Kcal MILES 7’5” 7’5” 23:34 AVG Pace PM Pace 23:34:56 23:34:56 23:34:56 Pace AVG Pace TIME 2) Long press the touch key for 2s to quit the run mode.
6. Bike Mode 1) Long press the touch key for 2s to start the bike mode. Bike During exercise, tap on the touch key to flip through the exercise data. 89 234 BPM Kcal 23:34 PM 23:34:56 23:34:56 23:34:56 BPM Kcal Time 2) Long press the touch key for 2s to quit the bike mode. The following data is displayed after the exercise is ended: 23 90 Min BPM 234 Kcal Min/Kcal BPM Single tap on the touch key to flip through the exercise data. 3) Single tap on the touch key to go to the main screen.
Note: In the APP Mainpage interface, tap , will pop up; tap to enter the running mode directly or tap to choose other sport modes. After starting the running mode, the APP will track and map your run distance; after the exercise, you can effortlessly check your workout data. 6.1 Abnormal Situations During Exercise 1) Inactive Exit Prompt a) Device will automatically exit the sport mode if no action is taken in 15 minutes.
2) The prompt of being forced to exit the sport mode when memory is full ！ MEMORY FULL Single tap on the touch key to confirm the prompt if the device is force to exit the sport mode when memory is full, then exit the sport mode and exercise data is displayed. Notes: ● The sport mode lasts for up to 6 hours. ● When the memory is full, it will prompt that the sport mode is forced to exit.
Notes: ● Long press the touch key to reject the call; single tap on the touch key to return to the main screen. ● Only when "Call Alert" is ON in the APP, calls will be notified. (When turning on/off the Call Alert function, please click "√" to save your settings.
4) Sedentary Alert Open the "VeryFitPro" APP. Tap on "Device" → "Sedentary Alert" to switch on the Sedentary Alert function and set the alert time. The device will vibrate to remind you to move after the set sedentary alert period passed. 5) Device Error Notification Note: When the device has an exception, the interface is displayed every time when the device is turned on.
Electronic Information Products Poisonous and Harmful Statement This product meets the EU ROHS standards Refer to IEC 62321 and EU RoHS Directive 2011/65 / EU and its revision instructions FAQs Failed to bind the device with APP 1) Make sure the Bluetooth of your smartphone is ON. (Do not pair the tracker with your phone's Bluetooth on your phone, but in "VeryFitPro" APP (Step 5).
Note: For iOS smartphones, if you failed to find "ID115Pro" in the APP, take the following steps: a) Go to your smartphone "Settings" → "Bluetooth". Under " → "Forget "MY DEVICES", find "ID115Pro", tap on " This Device" and turn off Bluetooth. b) Reboot smartphone and open the "VeryFitPro" APP. When asked whether to turn on the Bluetooth switch, click OK to search and bind your device.
Failed to measure heart rate Make sure the wrist band sit neatly on your wrist before use. Tap on the touch key to go to the heart rate mode and wait for 10~20s to detect the heart rate. Failed to connect to the smartphone The device will disconnect from your smartphone in the following cases: 1) Smartphone Bluetooth was off or exceed normal Bluetooth connection distance range (The normal Bluetooth connection distance is within 10 meters, it can easily be reduced by walls or furniture, etc.
SAFETY AND WARRANTY Important Safety Instructions The device contains electrical equipment that may cause injury if not used properly. For example, prolonged contact may contribute to skin allergies for some users. To reduce irritation, please read the safety guidelines on the following pages to ensure proper use and care. ● Do not expose your device to liquid, moisture, humidity or rain while charging; do not charge your device when it is wet, as it may result in electric shock and injury.
● For light colored arm bands, minimize direct contact with dark-colored clothing, as color transfer could occur. ● Dispose of this device, the device’s battery and its package in accordance with local regulations. ● Don’t not check any notifications, GPS, or any information on your device’s display while driving or in other situations where distractions could cause injury or hazardous. Always be aware of your surroundings while exercising. Battery Warnings A lithium-ion battery is used in this device.
● While the optical wrist heart rate monitor technology typically provides the best estimate of a user's heart rate, there are inherent limitations with the technology that may cause some of the heart rate readings to be inaccurate under certain circumstances, including the user's physical characteristics, fit of the device, and type and intensity of activity. ● The activity tracker relies on sensors that track your movement and other metrics.
● If your bands get wet—like after sweating or showering—clean and dry them thoroughly before putting them back on your wrist. ● Be sure your skin is dry before you put your bands back on. Warranty We strive to build our products with the highest attention to detail and craftsmanship. However, sometimes there are occurrences of defect. We are happy to offer 1-year hassle-free warranty to all our devices as we continue to make amazing products. Please contact us if you have any questions about our devices.
FCC Statement: This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
