Fitness Tracker User Manual ID115U HR / ID115U Thank you for purchasing our products. This manual addresses the safety guidelines, warranty and operating instructions. Please review this manual thoroughly before operating your device.
SAFETY AND WARRANTY Important Safety Instructions The device contains electrical equipment that may cause injury if not used properly. For example, prolonged contact may contribute to skin allergies for some users. To reduce irritation, please read the safety guidelines on the following pages to ensure proper use and care. ● Do not expose your device to liquid, moisture, humidity or rain while charging; do not charge your device when it is wet, as it may result in electric shock and injury.
● For light colored arm bands, minimize direct contact with dark-colored clothing, as color transfer could occur. ● Dispose of this device, the device’s battery and its package in accordance with local regulations. ● Don’t not check any notifications, GPS, or any information on your device’s display while driving or in other situations where distractions could cause injury or hazardous. Always be aware of your surroundings while exercising. Battery Warnings A lithium-ion battery is used in this device.
● While the optical wrist heart rate monitor technology typically provides the best estimate of a user's heart rate, there are inherent limitations with the technology that may cause some of the heart rate readings to be inaccurate under certain circumstances, including the user's physical characteristics, fit of the device, and type and intensity of activity. ● The activity tracker relies on sensors that track your movement and other metrics.
● If your bands get wet—like after sweating or showering—clean and dry them thoroughly before putting them back on your wrist. ● Be sure your skin is dry before you put your bands back on. Warranty We strives to build our products with the highest attention to detail and craftsmanship. However, sometimes there are occurrences of defect. We are happy to offer 1-year hassle-free warranty to all our devices as we continue to make amazing products. Please contact us if you have any questions about our devices.
Please charge your new device for 10 minutes before initial use. USB Charging The red indicator is on during charging. Note: If the charging red indicator is not on when you plug the device in a USB port for charging, check the direction of the device's charging plug and move to the correct direction. Make sure the pins on the charging plug contact the pins in the USB port.
System Requirement (Smart Phone Only) • iOS 7.1 & above • Android 4.4 & above • Bluetooth 4.0 & above Quick Start Guide 1. Download "VeryFitPro" APP for Android and iOS Smart Phones Option 1: Search for "VeryFitPro" in APP store or Google Play. Once APP is located, please download and install it to your smart phone. Notes: 1) This fitness device is for iOS 7.1 & above or Android 4.4 & above. Please refer to the operate system above for device compatibility.
Charging: remove the host from the wrist band by gently pulling the band out of the host; connect the device host to a normal DC USB port (5V-500mA). USB Charging Plug Touch Key Display Screen (Non-touch) 3. Bind the Device Make sure your smart phone's Bluetooth is ON before attempting to bind your fitness tracker. 1) Open "VeryFitPro" APP and on the bottom toolbar, go to "Device" tab. 2) Tap "Bind Device" at the bottom of "Device" page and your smart phone starts searching devices.
Once the device is connected to the APP successfully, it will record and analyze your activities and sleeps automatically, as well as monitor heart rate status. Please tap the touch key on the device's screen: 1. Display → Time Heart Rate (ID115U HR) → Sport → Steps → Distance → Calories → Activity Time → Alarm MI 200 MIN 10:00 SUN → Find Phone AM Note: Alarm and Find Phone will only be displayed on the screen after you switch the functions on in the APP. 2.
3. Sport Tap the touch key to switch to the Sport mode press and hold the key for 3 sec. to enter Sport mode. → Sport Start , then → Heart Rate (ID115U HR) Stopwatch → → → Calories → Clock Steps Distance → Press and hold the touch key for 3 sec. to quit the Sport mode. Sport Stop 4.
Activities Record: Record daily activities. You can check daily activity data including steps, distance and calorie burned on the APP. Sleep Monitor: Device can automatically recognize your state and monitoring the whole sleep progress with deep sleep, light sleep and awake sleep hours record. Notification Alerts: Alarm alert, call alert, sedentary alert, etc. with silent vibration. Remote Camera Control: Use the tracker to control smartphone shooting photos.
3) Make sure the "VeryFitPro" APP is trusted by your smartphone by going to your smartphone system Settings, finding "VeryFitPro" APP and enabling the Location and all Notifications. (Specific setting methods may vary according to different smartphones. 4) Make sure the fitness tracker is under unbind status before pairing. 5) Open "VeryFitPro" APP on your smartphone and tap "Device" → "Bind device", then your smartphone starts searching devices.
Measure heart rate (ID115U HR version) Make sure the wrist band sits neatly on your wrist before use. Tap the touch key to go to the heart rate mode and wait for 10~20s to detect the heart rate. Connect to the smartphone The device will disconnect from your smartphone in the following cases: 1) Smartphone Bluetooth was off or exceed normal Bluetooth connection distance range (The normal Bluetooth connection distance is within 10 meters, it can easily be reduced by walls or furniture, etc.
Water proof The tracker is splash waterproof (IP67), you can wash your hands without taking it off, but do not shower or swim with it. Wrist sense When you turn over your wrist slowly by 90 degrees, the device screen will be on. Turn on this function by going to the APP → "Device" → "Wrist sense". Find phone To turn on this function, make sure the tracker is connected to your smartphone, enter the APP, go to "Device" → "More" → "Find Phone", and turn it on.
FCC ID:2AR5EID115UHR NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
