Fitness Tracker User Manual ID151 Thank you for purchasing our products. This manual addresses the safety guidelines, warranty, and operating instructions. Please review this manual thoroughly before operating your device.
Contents English Version Getting Started.................................................................1 What’s in the Box............................................................1 What’s in this Document..................................................1 Setting Up Your Tracker..................................................2 Charging Your Tracker.....................................................2 Assembling/Dissembling Your Tracker.............................3 Wearing Your Tracker..............
8.2 Abnormal Operation Situation During Exercise...18 9. Tracking Sleep........................................................18 10. More Functions.......................................................19 10.1 Call Notification................................................19 10.2 Message Notification........................................19 10.3 Sedentary Reminder.........................................20 10.4 Remote Camera Control...................................20 10.5 Device Error Notification....
Getting Started What’s in the box Fitness Tracker User Manual ID151 Thank you for purchasing our products. This manual addresses the safety guidelines, warranty, and operating instructions. Please review this manual thoroughly before operating your device. Fitness tracker (ID151 with bands) User manual Note: This tracker is designed with a built-in USB plug, no charging cable is required for charging, and no charging cable or wall charger is included in the package.
Setting up Your Tracker 1. Charging your tracker Please charge your tracker for at least 10 minutes to have it activated before initial use. Insert the built-in USB plug of the tracker into the USB port for charging. Please ensure that the metal strips align with the USB strips. When the tracker shows a low battery indication, connect the tracker to a USB charging adaptor or a port with 5V-500mA. If the tracker is installed correctly, the tracker will vibrate.
2. Assembling/Dissembling Your Tracker Assemble Push the bands in following the direction of the arrow. Disassemble Gently pull the bands off the tracker body following the direction of the arrow. Wearing Your Tracker All-day wear and exercise For all-day wear when you’re not exercising, wear the device on your wrist horizontally, a finger’s width below your wrist bone and lay flat, the same way you would put on a watch.
For optimized heart rate tracking, keep these tips in mind: 1. Experiment with wearing the tracker higher on your wrist during exercise. Because blood flow in your arm increases the farther up you go, moving the tracker up a couple of inches can improve the heart rate signal. Also, many exercises such as bike riding or weight lifting cause you to bend your wrist frequently, which is more likely to interfere with the heart rate signal if the tracker is lower on your wrist. 2.
Using Your Tracker App Installation Use the watch with our customized VeryFitPro app. You can download VeryFitPro from Apple Store/Google Play or scan the QR codes below to download. iOS Android VeryFitPro Notes: ● The VeryFitPro app is only compatible with smartphones, not tablets or PCs. ● Smartphone operating system should be iOS 9.0 / Android 4.4 or higher; Bluetooth version should be 4.0 or higher. Smart Phone System Requirement ● iOS 9.0 & above ● Android 4.4 & above ● Bluetooth 4.
App Interfaces Main Page (Swipe down the page to sync data from the tracker to your phone) Details -6-
Device User -7-
Pairing the Tracker with Your Phone Please pair the tracker with your phone in the VeryFitPro app, NOT in the Bluetooth settings of your phone. Pair the tracker with your smartphone in the VeryFitPro app iOS Do NOT pair the tracker with your smartphone in your phone’s Bluetooth settings Android 1) Please ensure to enable the Bluetooth of your phone before beginning the pairing process.
Bluetooth ID151 ① ② ③ Notes: 1) Once the tracker is connected to your app, the tracker will automatically search and reconnect itself if the connection is lost or manually disconnected when your Bluetooth connection is restarted. 2) If the tracker is unbound from the app, the information on the tracker will be reset, and the information on the app will be cleared. Please do not unbind the connection unless there is an issue that will require a reset.
Display Note: This is a non-touch screen; please use the touch key to choose different functions. Touch Key Note: Tap the touch key to switch to different interfaces; Hold the touch key to enter the function. fig. 1 2. Waking a Dimmed Screen To conserve power, the tracker has a standby mode in which the screen turns off. To wake the screen, please follow the following steps: ● Turn your wrist towards you, and the screen will display time. ● Tap the touch key, and the tracker will display the main screen.
Run Bike AM Mon Run Mode Bike Mode Stopwatch Mode Alarm Mode※2 ※1: "Walk Mode", "Run Mode" and "Bike Mode" are displayed on the device screen by default. You can set up to 3 different sports modes from 14 sports modes to display on the device screen (Go to "VeryFitPro" APP → "Device" → "More"→ "Activity display"). ※2: "Alarm Mode" is displayed on the tracker screen only when alarm alert(s) is/are added and enabled in the app ("Device" page → "Alarm Alert"). Function Introduction 1.
2. Tracking Daily Activity Data The tracker tracks your all-day activity data like steps, distance, calories burned and active minutes. Hold the touch key for 2s to view detailed step data and tap to flip through the data. Note: You can go to the app to set your sports target ("User" page → "Target Setting"). When you reach your sports target, the tracker vibrates to remind you. 3. Monitoring Heart Rate The tracker tracks your real-time heart rate automatically and continuously.
Notes: ● To monitor heart rate more accurately, wear the tracker on the upper position of your wrist and a bit tighter than usual when you are taking exercise. Besides, complete your profile in the app. ● Automatic heart rate monitoring is ON as default, monitoring heart rate all day automatically. You can disable/enable automatic heart rate monitoring in the app ("Device" page → "Heart Rate Detection"). 4. Stopwatch This tracker has stopwatch mode, you can start timing while doing your workouts.
6. Tracking Sports: Walk The tracker can tracks your exercise data during walking. 1) Hold the touch key for 2s to start the walk mode. Walk 2) During exercise, tap the touch key to flip through exercise data. 3) Hold the touch key for 2s to exit the walk mode. The following data is displayed after the exercise is ended; tap the touch key to flip through exercise data: Note: Data of exercises less than 1 minute will not be saved.
7. Tracking Sports: Run The tracker tracks your exercise data during running. 1) Hold the touch key for 2s to start the run mode. Run 2) During exercise, tap the touch key to flip through exercise data. 3) Hold the touch key for 2s to exit the run mode.
8. Tracking Sports: Bike The tracker tracks your exercise data during cycling. 1) Hold the touch key for 2s to start the bike mode. Bike Bike 2) During exercise, tap the touch key to flip through exercise data. 3) Hold the touch key for 2s to exit the bike mode.
Notes: ● You can also use the GPS of your phone to track your pace & distance during walks, hikes, runs or rides while mapping out your run or walk on your phone. ● In the app, tap , will pop up; tap to enter the running mode directly or tap to choose another sport mode. After starting the running mode, the app will track and map your run distance (using the GPS of your phone). After the exercise, you can effortlessly check your exercise data in both the app and the tracker. 8.
Tap the touch key to confirm the prompt if the tracker is forced to exit the sport mode when memory is full, then exit the sport mode and exercise data is displayed. Notes: ● The sport mode lasts for up to 6 hours. ● When the memory is full, it will prompt that the sport mode is forced to exit.
10. More Functions 10.1 Call Notification When there is an incoming call, the tracker vibrates to remind you and the screen displays the caller ID. Contact name Stranger number in contact list Hold the touch key for 2s to reject the call; tap the touch key to return to the main screen. Notes: ● Only when "Call alert" is enabled in the app ("Device" page → "Call Alert"), calls will be notified (After enabling/disabling the Call Alert function, click "√" to save your settings.
10.3 Sedentary Reminder The tracker vibrates to remind you to move when you are sitting too much ("Device" page →"Sedentary Alert", enable the Sedentary Alert function and set the remind interval.) 10.4 Remote Camera Control If you want to position your phone for a photo and then take the photo from a distance, you can use the tracker to take the photo. 1) Make sure you have allowed the VeryFitPro app to access your phone camera and photos in your phone settings.
10.5 Device Error Notification When the tracker has an exception, an Error is displayed. Status code: -01 indicates acceleration sensor abnormality; -02 indicates the heart rate sensor is abnormal; -03 indicates touch IC is abnormal; -04 indicates the flash is abnormal; Basic Specifications Model No.: ID151 Sync: Bluetooth 4.2 Battery Capacity: 90mAh Working Voltage: 3.7V Working Temperature: -20℃ to 40℃ Weight: 0.
FAQs Failed to find the tracker when pairing 1. Make sure the Bluetooth of your smartphone is enabled, and your smartphone system meets the requirement of iOS 9.0 or later, Android 4.4 or later, Bluetooth 4.0 or later. 2. Make sure the distance between your smartphone and the tracker is within 0.5 meters, also the Bluetooth communication is among the distance range (within 10 meters). 3. Make sure your tracker has enough battery. If there is still a problem after it was fully charged, please contact us.
steps when you swing your arm. Sometimes the data on tracker may display a little delayed. And it will reset itself if you walk less than 40 steps continuously. To test the accuracy of the pedometer, please walk casually and continuously up to 100 steps or more. Failed to measure heart rate Make sure the tracker sits neatly on your wrist before use. Tap the touch key to go to the heart rate mode and wait for 10~20s to have your heart rate.
Warranty and Safety Instructions Warranty We strive to build our products with the highest attention to detail and craftsmanship. However, sometimes there are occurrences of a defect, so we are happy to offer a ONE-year hassle-free warranty on all our devices as we continue to make amazing products. Please contact us if you have any questions about our devices. Important Safety Instructions The device contains electrical equipment that may cause injury if not used properly.
● Never try to abuse, crush, open, repair or disassemble this device. Doing so will void the warranty and can result in a safety hazard. ● If any parts of your product require replacement for any reason, including normal wear and tear or breakage, please contact us. ● Do not use your device in a sauna or steam room. ● Dispose of this device, the device’s battery and its package in accordance with local regulations.
● The device, accessories, heart rate monitor, and related data are intended to be used only for recreational purposes and not for medical purposes and are not intended to diagnose, monitor, treat, cure, or prevent any disease or condition. ● The heart rate readings are for reference only, and no responsibility is accepted for the consequences of any erroneous readings.
Maintenance ● Regularly clean your wrist and the fitness tracker, especially after sweating in the exercise or being exposed to substances such as soap or detergent which may attach on the internal side of the tracker. ● Do NOT wash the fitness tracker with household cleanser. Please use soapless detergent, rinse thoroughly and wipe with a piece of soft towel or napkin. ● While the fitness tracker is water resistant, it’s not good for your skin to wear a wet band.
FCC Statement: This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2)this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
