Datasheet

ManualsBrandsLeuze electronic ManualsOptical SensorsOptical Distance Sensor 8m Push-Pull

Leuze electronic GmbH + Co. KG In der Braike 1 D-73277 Owen Tel. +49 (0) 7021 573-0

info@leuze.com • www.leuze.com

We reserve the right to make changes • DS_ODS10L18L_en_50129320_01.fm

en 04-2016/08 50129320-01

 Reflection-independent distance informa-

tion up to 3500mm

 Analog current and voltage output (factory

setting: current output)

 OLED display and membrane keyboard for

configuration

 Configurable measurement range and mea-

sure mode

 IO-Link version 1.1

 Measurement value display in mm on OLED

display

 Optional input for deactivation of the laser

(factory setting) or for teach-in

50 … 8000mm

Accessories:

(available separately)

 Mounting systems

 Cable with M12 connector (K-D …)

 IO-Link master set

SET MD12-US2-IL1.1 + accessories - diag-

nostics set (part no. 50121098)

IP 67

IEC 60947...

Dimensioned drawing

A Reference edge for the measurement

B Optical axis

C Turning M12 connector, 90°

D Receiver

E Transmitter

F OLED display

G Indicator diodes green/red (control panel)

2 x yellow (control panel and lens cover)

H Membrane keyboard

Electrical connection

18-30V DC +

4-20mA

GND

18-30V DC +

4-20mA

GND

18-30V DC +

4-20mA

GND

18-30V DC +

GND

don`t connect

18-30V DC +

4-20mA

GND

ODS10L1.8/LAK-M12

ODS10L1.8/LAK,200-M12

ODS10L1.8/L6X-M12

ODS10L1.8/LA6-M12

ODS10L1.8/LA6,200-M12

ODS10L1.8/LAK

ODS10L1.8/LA6

ODS10 Optical distance sensors

ODS10L1.8/L… - 04

Summary of content (6 pages)

PAGE 1
ODS10 Optical distance sensors en 04-2016/08 50129320-01 Dimensioned drawing Q1 Q2 We reserve the right to make changes • DS_ODS10L18L_en_50129320_01.fm 50 … 8000mm  Reflection-independent distance information up to 3500mm  Analog current and voltage output (factory setting: current output)  OLED display and membrane keyboard for configuration  Configurable measurement range and measure mode  IO-Link version 1.
PAGE 2
ODS10 Technical data Tables Measure modes: Measurement data Measurement range 50 … 3500mm (6 … 90% diffuse reflection) 50 … 8000mm (90% diffuse reflection) 1mm ≤ ±15mm 1) 0.5 … 2mm 2), see diagrams 3.4 … 1020ms, adjustable3), see tables 3.4ms 4), see tables ≤ ±2mm/K Resolution Accuracy Reproducibility Response time Output time Temperature drift Optical data Light source Laser class Wavelength Impulse duration Max. output power (peak) Light spot laser 1 (acc.
PAGE 3
ODS10 Optical distance sensors Laser safety notices ATTENTION, LASER RADIATION – LASER CLASS 1 The device satisfies the requirements of IEC 60825-1:2007 (EN 60825-1:2007) safety regulations for a product of laser class 1 as well as the U.S. 21 CFR 1040.10 regulations with deviations corresponding to "Laser Notice No. 50" from June 24, 2007.  Observe the applicable statutory and local laser protection regulations.  The device must not be tampered with and must not be changed in any way.
PAGE 4
ODS10 IO-Link process data Process data format: M-sequence TYPE_2_V - PDOut (Master -> Sensor): none - PDIn (Sensor -> Master): 24-bit (16 measurement value bits, 8 status bits) Measurement values 16-bit measurement value: distance to the object – between lower and upper limit of the measurement range – in mm.
PAGE 5
ODS10 Optical distance sensors Part number code O D S 1 0 L 1 . 8 / L A K , 2 0 0 - M 1 2 Operating principle ODS Optical distance sensor Series 10 10 series Laser class L1 Laser class 1 (acc.
PAGE 6
ODS10 Order guide Designation Part no. Connection: M12 connector, 5-pin IO-Link 1.1, analog output, multifunction input, 1 push/pull switching output IO-Link 1.1, analog output, 2 push/pull switching outputs IO-Link 1.1, dual channel, 2 push/pull switching outputs ODS10L1.8/LAK-M12 ODS10L1.8/LA6-M12 ODS10L1.8/L6X-M12 50127853 50129529 50129528 Connection: cable, length 2000mm with wire-end sleeves, 5-wire IO-Link 1.1, analog output, multifunction input, 1 push/pull switching output IO-Link 1.