Datasheet

Micro-triad-type reflectors
Part no. Designation Article Description
50117583 MTKS 50x50.1 Reflector Design: Rectangular
Reflective surface: 50 mm x 50 mm
Material: Plastic
Base material: Plastic
Chemical designation of the material: PMMA8N
Fastening: Through-hole mounting, Adhesive
Reflective tapes for standard applications
Part no. Designation Article Description
50106119 REF 4-A-100x100 Reflective tape Design: Rectangular
Reflective surface: 100 mm x 100 mm
Material: Plastic
Chemical designation of the material: PMMA
Fastening: Self-adhesive
50110192 REF 6-A-50x50 Reflective tape Design: Rectangular
Reflective surface: 50 mm x 50 mm
Material: Plastic
Chemical designation of the material: PMMA
Fastening: Self-adhesive
Notes
Observe intended use!
• This product is not a safety sensor and is not intended as personnel protection.
• The product may only be put into operation by competent persons.
• Only use the product in accordance with its intended use.
For UL applications:
• Only for use in "class 2" circuits
• These proximity switches shall be used with UL Listed Cable assemblies rated 30V, 0.5A min, in the field installation, or equivalent
(categories: CYJV/CYJV7 or PVVA/PVVA7)
• Light source: Average life expectancy 100,000 h at an ambient temperature of 25 °C
Part no.: 50134279 – PRK25C/4P-M12 – Polarized retro-reflective photoelectric
Leuze electronic GmbH + Co. KG, In der Braike 1, D-73277 Owen [e-mail] • www.leuze.com
Phone: [phone], Telefax [phone] We reserve the right to make technical changes • eng 2017-07-26
12 / 12