Datasheet

PRK3CL Laser - 02 2017/02

IO-Link interface

Sensors in the PRK3C…/L… variant have a dual-channel architecture. The IO-Link interface in accordance with specification

1.1.1 (October 2011) is provided on pin 4 (OUT 1). This allows the devices to be configured quickly and easily and, therefore,

cost-effectively. Furthermore, the sensor transmits its process data and makes diagnostic information available through it.

Parallel to the IO-Link communication, the sensor can output the continuous switching signal for object detection on OUT 2. The

IO-Link communication does not interrupt this signal.

Note: In Leuze Sensor Studio, the following applies with regard to the designations: Q1 = OUT 1, Q2 = OUT 2.

IO-Link process data

Output data device

Input data device

Device-specific IODD

At www.leuze.com in the download area for IO-Link sensors you will find the IODD zip file with all data required for the installa-

tion.

IO-Link parameter documentation

A complete description of the IO-Link parameters is given in the *.html files. Please double-click one of the two language variants:

*IODD*-de.html for German or *IODD*-en.html for English.

Data bit Assignment Meaning

76543210

Switching output Q1 (OUT 1) 0 = inactive, 1 = active

Warning output autoControl 0 = no warning, 1 = warning

Sensor operation

1) Sensor operation off when detection is not possible (e.g during the teach event)

0 = off, 1 = on

Not used Free

Data bit Assignment Meaning

76543210

Deactivation 0 = transmitter active,

1 = transmitter inactive

Not used Free

PRK3CL autocollimation