USER MANUAL Stella ™ Digital Baby Video Monitor CAUTION: Keep small parts away from children. mylevana.
SAFETY WARNINGS CAUTION: Keep small parts away from children. This product cannot replace responsible adult supervision. Strangulation Hazard: Children can become entangled in cords. Power cords should be kept more than 3 feet away from the crib and baby’s reach at all times. Baby monitors and cameras with power cords should never be hung on or near the crib. Use only with provided power supply. This product is not a toy and should be kept out of children’s reach.
FCC STATEMENT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. FCC WARNING This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Please visit our website at www.myLEVANA.com for information about your product’s warranty We take quality very seriously. This is why all of our products come with a one-year warranty from the original purchase date against defects in workmanship and materials. If you have warranty or support issues please contact us using any of the following methods: Web: www.mylevana.com LEVANA Canada 4080 Montrose Road Niagara Falls, ON Canada L2H 1J9 Support: www.mylevana.
TABLE OF CONTENTS SAFETY WARNINGS ��������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 2 FCC STATEMENT �������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 3 WARRANTY ������������������
WHAT’S INCLUDED • • • • • • • Pan/Tilt/Zoom Night Vision Camera Baby Video Monitor Rechargeable Battery 2 Power Adapters Quick Start Guide 1 Year Warranty Lifetime Live Customer Support This product is not a toy. This product contains small parts. Exercise care when unpacking and assembling the product. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This product does not replace responsible adult supervision.
MONITOR 3 4 5 6 1 14 12 7 8 9 2 15 13 10 11 1. LCD SCREEN 6. PAN / TILT BUTTON 11. SELECTION / ZOOM BUTTON 2. MICROPHONE 7. MENU 12. SPEAKER 3. POWER ON/OFF 8. COLOR-CHANGING LED RING 13. TABLE STAND 4. TALK TO BABY™ Press and hold to talk, release to listen 5. Ring changes color with sound intensity LOCK / UNLOCK BUTTON Disables ALL function buttons in the LOCK position 9. DIRECTIONAL ARROWS / VOLUME CONTROL 14. ANTENNA Extend to improve signal 15. BATTERY COMPARTMENT 10.
CAMERA 1 7 5 2 3 8 6 9 4 1. PHOTO SENSOR 4. SPEAKER 7. ANTENNA 2. PTZ CAMERA 5. INVISIBLE LEDs 8. POWER LED 3. MICROPHONE 6. POWER ON/OFF 9. POWER INPUT mylevana.
SETUP LET’S GET STARTED! Battery connectors Battery Installation 1. Gently remove the BATTERY COMPARTMENT COVER on the back of the monitor. 2. Slide the BATTERY COMPARTMENT COVER down to remove. 3. Insert the battery; the battery connectors on the battery should line up with the connectors inside the battery compartment. 4. Slide the BATTERY COMPARTMENT COVER back into place. Get the Most Out of Your Rechargeable Battery 1. Fully charge battery (6-7 hours) before first use. 2.
SETUP Connecting Power to the Monitor / Charging Battery 1. Connect the small end of one power adapter into the DC input on the side of the monitor as shown in the diagram. Connect the other end of the adapter into an available wall outlet. 2. Press and hold the POWER button on top of the monitor to turn the monitor ON. 3. The icon in the top right corner of the main screen will show you the battery power status. 4. The LED Ring on the front of the monitor also indicates the battery power status.
SCREEN ICONS SIGNAL STRENGTH NO SIGNAL PTZ STRONG SIGNAL OFF BATTERY STRENGTH ZOOM EMPTY CHARGING FULL PEEP MODE ON OFF CAM 2 LOW MEDIUM VOLUME SUPPORT CAM 4 SEQ MODE BRIGHT PAIRING PAIRING 11 LOUD BRIGHTNESS DARK CAM 3 HIGH OFF TALK TO BABY™ CAMERA CAM 1 SOUND SENSITIVITY SETTING CAM 1 CAM 2 CAM 3 CAM 4 mylevana.
OPERATION Turn the MONITOR ON/OFF Press and hold the POWER Press and hold the POWER button on top of the monitor to turn the monitor ON. button again to turn OFF the monitor. Pairing the Camera(s) and Monitor The camera and monitor come paired (connected) to each other automatically. However, if upon opening this package the devices do not automatically connect and transmit, you may do so manually. Note: Before you begin pairing, be sure to have the monitor and the camera(s) side by side. 1.
OPERATION Placement of the Monitor This monitor can be placed on a tabletop. • You can place the monitor on a tabletop by using the retractable table stand on the back of the monitor. When not in use, simply tuck the table stand away into the back of the monitor until you hear a "click". Placement of the Camera This camera can be placed on a tabletop or hung on the wall above the area being monitored. • • Place the camera within 6 feet of the area being monitored for best picture results.
OPERATION Mounting the Camera on a Wall Safely: Before drilling the holes, it is important to check the reception and camera positioning in the intended location on the wall. Ensure you are hanging the camera no less than 3 feet away from baby’s crib. Note: Baby monitors and cameras with power cords should never be hung on or near the crib as it is a strangulation hazard. Power cords should be kept no less than 3 feet away from the crib and the baby’s reach at all times. 1.
OPERATION Night Vision The camera is equipped with NEW Invisible IR (infrared) LEDs which keep the nursery dark. The LEDs are located on the front of the camera and allow you to see up to 12 feet in complete darkness so you can check on your baby at any time of night. The night vision LEDs will activate automatically when the Light Sensor on the side of the camera detects that the light levels are too low. Adjusting the Camera Angle - PTZ The camera is equipped with Pan / Tilt / Zoom (PTZ).
OPERATION Volume Use the navigational arrows to increase /decrease /mute the VOLUME. • Press the • button to INCREASE the volume in LIVE VIEW; the VOLUME icon will display the volume level in the top left corner of the screen. Press the button to DECREASE the volume; to MUTE, decrease the volume until the icon appears in the top left corner of the screen. Note: Placing the monitor and camera too close together will create feedback. DECREASE or MUTE the volume and move the camera away from the monitor.
OPERATION Setting the lullaby volume Control the lullaby volume with a choice of three volume settings. 1. Select a lullaby, the volume icon will appear to the right of the lullaby selected. Press the SELECT button. The default volume setting is . 2. Use the navigational arrows decrease the volume. 3. To return to continuous live view, press the MENU on the front of the monitor to increase / button.
OPERATION Changing the Camera View 1. To change the camera view, press the MENU button. Using the navigational arrows on the front of the monitor, highlight the CAMERA icon. 2. Use the SELECT 3. Select to cycle though cameras 1 through 4 and press the SELECT once to select. 4. To return to continuous live view, press the MENU to toggle to select the CAMERA icon of your choice and press the button once to select. button button.
OPERATION Setting the Brightness Brightness Mode sets the brightness of the the screen. Brightness Mode also extends the battery life. 1. To set the Brightness Mode, press the MENU button. Using the navigational arrows on the front of the monitor, highlight the BRIGHTNESS icon. 2. Use the to toggle to the your desired brightness and press the SELECT button once to select.
TROUBLESHOOTING ISSUE POSSIBLE SOLUTION Equipment does not function • • • Confirm that the camera and monitor are ON The battery may be depleted; charge battery The power adapters may not be properly connected No reception • • • Camera and monitor may not be properly paired; follow PAIRING instructions Camera may be too far away from the monitor Extend the antenna on the monitor Reception Interference (static) • • • • The camera and monitor may be too far apart The battery power may be too low Oth
SPECIFICATIONS MONITOR MONITOR Monitor Type TFT LCD Talk to Baby Yes Screen Size 4.3" Lullabies Yes Resolution 480 x 272 Battery Type Li-Ion Frame Rate 12 FPS Battery Capacity 3.7V 1700mAh 6.290Wh LCD Brightness Adjustable: 0,1,2,3,4 Battery Connection Charging Contact Frequency 2.4GHz Battery Life (video + audio on) 8 hours Private Signal Yes Battery Life (LCD off) 10 hours Technology Digital FHSS Battery Life (PEEP Mode) Up to 36 hours No.
SPECIFICATIONS CAMERA CAMERA Image sensor CMOS Housing Material ABS Plastic Resolution 640 x 480 Wall Mountable Yes Viewing Angle 50 Degree Power Adapter Input 100~240VAC, 50/60Hz 150mA Focal Length 2.8mm Power Adapter 5.9V 1A DC Optimal Focal Distance 2-10 feet Operating Temperature 0 to 50 Degrees Celsius PTZ Yes Dimensions 3.5” x 4 ¾” x 3.5” Range of Motion - Horizontal 270 Degrees Weight 0.65 lbs Range of Motion - Vertical 110 Degrees Frequency 2.
POWER Adapter: BLJ5W059100P—U ; Input: 100– 240VAC 50/60Hz 150mA; Output: 5.9V,1000mA; WARNING 1. Use only with provided power supply; 2. The socket-outlet shall be installed near the equipment and shall be easily accessible; Battery: Model: 464854P, Li-ion battery, 3.7V 1700mAh 6.290Wh, Limited charge voltage: 4.2V. OR Battery: Model: 495255AR; Li-ion battery, 3.7V 1700mAh 6.290Wh, Limited charge voltage: 4.2V. OR Battery: Model: 495255; Li-ion battery, 3.7V 1700mAh 6.290Wh, Limited charge voltage: 4.2V.
