Quick Start Guide

Disassemble your lock
and keep the pieces.
Unscrew the lock housing, the deadbolt, and the
strike plate. Store the deadbolt and strike plate
in the Level box.
Install your Level Lock
and strike plate.
A. Insert the bolt into your door with the word TOP
facing up. Fasten with the provided bolt screws.
B. Slide on the motor and make absolutely sure
to tighten the connecting screw.
C. Using your old bolt for reference, select the
correct tailpiece adapter and insert it into the
motor’s center hole. Keep the other two adapters.
D. Fasten the strike plate to your door jamb with
the provided strike plate screws.
Activate your Level Lock.
Insert the battery into the end of the deadbolt with
the flat (negative) end towards the cap and twist to
screw it back in tightly. You’ll hear a welcome chirp.
Download the app at www.level.co/app,
create an account, and connect to your lock.
Test your deadbolt.
Make sure your current deadbolt throws smoothly
without pushing or pulling the door.
02 03 0501
Reassemble your lock
using the original pieces.
Completely rotate the tailpiece in the direction
to unlock the door (away from the door edge).
Thread the tailpiece through the adapter and
screw your lock housing back together loosely
using your original screws.
Align the two sides of your lock and manually
test your deadbolt. If it doesn’t throw smoothly,
recenter the housing, ensuring that one side is
not lower than the other. Tighten the screws.
04
Visit www.level.co/install for more information
and tips on installing your Level Lock.
What you need:
Phillips Screwdriver
Compatible iOS or Android Device