Compatibility Guide

ManualsBrandsLevel ManualsDeadboltsBolt, The Invisible Smart Lock. Bluetooth Deadbolt, Keyless Entry, Smartphone Access, Works with Ring and Apple HomeKit

1level.co

Learn about Level in your home.

Level works with most Standard

deadbolts with an exterior profile

no greater than ¾” (19mm).

Determine the type of lock you

have and get suggestions for

installation.

All deadbolts need a properly

aligned door to operate

smoothly. Learn how to check

your door alignment and see if it

needs adjusting.

ANSI standard exterior doors

have required measurements

for width, bore hole, and

backset. Learn how to make

sure your door meets this

standard.

Type of Lock Door Alignment Measurements

level.co/compatibility

bore hole

door

thickness

1 ”

backset

2 ” or 2 ”

Level Lock was designed to work with most American standard deadbolts and

requires a properly operating door and latch. Visit our interactive compatibility

guide or read through the steps below to make sure you have what you need to

successfully install your lock.

Summary of content (7 pages)

PAGE 1
Learn about Level in your home. Level Lock was designed to work with most American standard deadbolts and requires a properly operating door and latch. Visit our interactive compatibility guide or read through the steps below to make sure you have what you need to successfully install your lock. level.
PAGE 2
1 Lock Type First, let’s determine what kind of existing hardware you have. Review the lock types below to find the kind of lock that looks most like yours.
PAGE 3
2 Door Alignment Over time, doors can become misaligned due to normal wear and tear or changes in weather. All deadbolts need a properly aligned door to operate smoothly. Let’s check your door alignment: With the door closed in its normal position, does the latch engage properly and hold the door in the closed position? Does the bolt lock and unlock without any friction? Tip: If you need to push or pull on the door so the deadbolt can turn smoothly, your door is misaligned and needs adjusting. level.
PAGE 4
3 Door Specifications Level Lock is engineered to fit inside ANSI standard exterior doors. Make sure your door meets this standard by taking 3 simple measurements: REQUIRED MEASUREMENTS: • Door thickness is 1 ¾” thick • Bore hole size is 2 ⅛” in diameter • Backset length is either 2 ⅜” or 2 ¾” level.
PAGE 5
3 Door Specifications (continued) Level Lock is engineered to meet ANSI standard strike plate dimensions. The strike plate is located on the door frame and is where the bolt extends in the locked position. Make sure your strike plate cut-out meets standard dimensions: REQUIRED MEASUREMENTS: • ANSI standard height of 2 ¾” and width of 1 ⅛” (Tall) - OR • ANSI standard width of 2 ¼” and width of 1 ⅛” (Short) level.
PAGE 6
4 Lock Specifications Level Lock is designed to work with most American standard residential deadbolts. The following list of deadbolts is just a highlight of some of the verified makes and models that are compatible with Level Lock. To find a complete list of compatible deadbolts, visit the URL below. level.co/support/compatible-deadbolts level.
PAGE 7
Compatibility Review Summarized below are the areas to consider to make your lock installation process as seamless as possible. 1 Lock Type First, determine what kind of existing hardware you have. Review the lock types to find the kind of lock that looks most like yours. 2 Door Alignment Over time, doors can become misaligned due to normal wear and tear or changes in weather. All deadbolts need a properly aligned door to operate smoothly.