Measurement Guide

ManualsBrandsLevel ManualsDoor & Window SecurityTouch Edition Smart Lock Bluetooth Replacement Deadbolt with App/Key/Voice Assistant Access - Satin Chrome

1level.co

Will Level Touch work with my door?

level.co/compatibility

Level Touch is designed for standard exterior doors that meet ANSI specifications and

requires a properly operating door and latch. Visit our interactive compatibility guide

or read through the steps below to make sure you have what you need to successfully

install your lock. To learn more, visit our Support page.

American standard deadbolt Properly aligned doorStandard size door

bore hole

door

thickness

1 ” - 2”

backset

2 ” or 2 ”

Summary of content (6 pages)

PAGE 1
Will Level Touch work with my door? Level Touch is designed for standard exterior doors that meet ANSI specifications and requires a properly operating door and latch. Visit our interactive compatibility guide or read through the steps below to make sure you have what you need to successfully install your lock. To learn more, visit our Support page. level.co/compatibility 1 ” - 2” door thickness bore hole 2 ” or 2 backset American standard deadbolt level.
PAGE 2
1 Lock Type Let’s determine your current setup. Review the lock types below to find the kind of lock that looks most like yours.
PAGE 3
2 Door Alignment Over time, doors can become misaligned due to normal wear and tear or changes in weather. All deadbolts need a properly aligned door to operate smoothly. Let’s check your door alignment: With the door closed in its normal position, does the latch engage properly and hold the door in the closed position? Does the bolt lock and unlock without any friction? Tip: If you need to push or pull on the door so the deadbolt can turn smoothly, your door is misaligned and needs adjusting. level.
PAGE 4
3 Door Specifications Level Touch is engineered to work with ANSI standard exterior doors. Make sure your door meets this standard by taking 3 simple measurements: 1 ” - 2” door thickness bore hole 2 ” or 2 backset ” REQUIRED MEASUREMENTS: • Door thickness is 1 ¾”- 2” thick • Bore hole size is 2 ⅛” in diameter • Backset length is either 2 ⅜” or 2 ¾” level.
PAGE 5
3 Door Specifications (continued) Level Touch is engineered to meet ANSI standard strike plate dimensions. The strike plate is located on the door frame and provides additional security for your home. Make sure your strike plate cut-out meets standard dimensions: REQUIRED MEASUREMENTS: • ANSI standard height of 2 ¾” and width of 1 ⅛” (Tall) - OR • ANSI standard width of 2 ¼” and width of 1 ⅛” (Short) level.
PAGE 6
Compatibility Review Summarized below are the areas to consider to make your lock installation process as seamless as possible. 1 Lock Type First, determine your current door setup. Review the lock types to find the kind of lock that looks most like yours. 2 Door Alignment Over time, doors can become misaligned due to normal wear and tear or changes in weather. All deadbolts need a properly aligned door to operate smoothly. 1 3 ” - 2” door thickness bore hole 2 ” or 2 backset level.