User's Manual

addresses (4.3.2.1-4.3.2.254). An empty implies all IP addresses.

For source or destination port, you can define a single port (80) or a range of ports (1000-1999). Add

prefix "T" or "U" to specify TCP or UDP protocol. For example, T80, U53, U2000-2999. No prefix

indicates both TCP and UDP are defined. An empty implies all port addresses.

Each rule can be enabled or disabled individually.

Inbound Filter:

To enable Inbound Packet Filter click the check box next to Enable in the Inbound Packet

Filter field.

Suppose you have SMTP Server (25), POP Server (110), Web Server (80), FTP Server

(21), and News Server (119) defined in Virtual Server or DMZ Host.

Example 1:

(1.2.3.100-1.2.3.149) They are allow to send mail (port 25), receive mail (port 110),

and browse the Internet (port 80)