Datasheet

www.level1.com
I
one world_one brand_one level_
3
Ethernet Switches
Technical Specications
Line Interface
Data Rate: 60/60 Mbps
Power: 48V
RJ-11 Connector x 1
LAN Interface
Auto-Detection for 10/100 Base-Tx and Half / Full duplex
Full compatible with IEEE 802.3 / IEEE802.3u
Automatic MDIX Function
RJ-45 Connector x 1
PSE
Output Voltage within 44~57V
Safety-Extra-Low-Voltage (SELV) Compliant
Maximum output power 15 Watts
LED Indicator:
Power: Green On- indicates power is on and normal
LAN: Green On- indicates Ethernet LAN port is in connection
Flashing- indicates Ethernet LAN data activates
Line: Green On- indicates 2-wire line is in connection
Flashing- indicates 2-wire line is in line handshaking
M/S: Green On-indicates as 2-wire Slave unit
Green O- indicates as 2-wire Master unit
Physical Dimension ( L x W x H ):
120mm x 90mm x 28mm
Operating Environment:
Humidity: 5% ~95% non-condensing
Temperature: 0~50°C
Regulatory Compliance:
FCC Rules Part 15
CE
Product Diagram
Order Information
POT-0110:
PoE Repeater over 2-wire (Slave)
Package Contents
POT-0110 x 1, User Manual x 1
All mentioned brand names are registered trademarks and property of their owners. Technical specications are subject to change without notice.
© Copyright Digital Data Communications GmbH. All Rights Reserved.
V1.0
Note: These distances are typical results when used with 24AWG RJ-11 Cable
Non-PoE Switch FSW-0513
POT-0100
1m
48W
POT-0110
100m
PoE PD devices
Ethernet Cable (RJ-45)
PoE (Power + Data)
RJ-11 Phone Line (Power + Data)
up to 400m
for 2 wire
Indoor to Indoor Solution
Non-PoE Switch POI-4000
POT-0100
1m
40W
POT-0110
100m
PoE PD devices
up to 300m
for 2 wire
Indoor to Indoor Solution