DVE-0500 DVI Extender via Fiber Channel User Manual Ver. 1.
Introduction LevelOne DVE-0500 DVI extender helps DVI to transmit far away via optical fiber, it supports up to 500 meters with 1024x768 resolutions. DVI (Digital Visual Interface) recently becomes a popular interface between monitor and PC; you can enjoy the benefits of long distances and crystal clear signal without any quality losses.
Package Content – DVE-0500 (RX+TX) – Power Adapter x 2 – DVI Extension Cable – User Manual Hardware Description Power Jack 2 x Duplex LC Connector DVI Interface Dimension 40 x 70 x 19mm (W x D x H) 4
Installation Step 1: Connect each duplex LC fiber cable one by one as indicated number. The channel “1” of TX corresponds to channel 1 of RX. The other channels are the same connection. Step 2: Connect the AC/DC adapter to the RX module. Neglect AC/DC adapter to the TX module. The PC may supply voltage source via DVI receptacle. Step 3: Plug directly the TX module in the DVI receptacle of PC. Do NOT use any intermediate cable or adapter between them.
Connection Diagram Multimode Fiber Resolution Resolution Mode Maximum Distance UXGA (1600×1200) 300m (62.5/125) / 500m (50/125) SXGA (1280×1024) 400m (62.5/125) / 600m (50/125) XGA (1024×768) 500m (62.5/125) / 700m (50/125) SVGA (800×600) 500m (62.5/125) / 700m (50/125) VGA(640×480) 500m (62.
Technical Specification Model DVE-0500 500M @ XGA, 62.5/125 MMF 4-LC Max Length 700M @ XGA, 50/125 MMF 4-LC Max Resolution 1920 × 1200 Max Bandwidth 1.65 Gbps per channel EDID Support Pseudo DDC 180mA±30, TX module Supply Current 280mA±30, RX module Optical Property 4 channels 850nm @ -6dBm Power DC 5V, 1.0A Operating Temp. -0℃ to 50℃ Storage Temp.
