User guide

30
NOTE: To enable this function, please make sure the UPnP
component is installed on your computer. Please refer to
Appendix E: Install UPnP Components for UPnP component
installation procedure.
• Enable UPnP port forwarding
When the UPnP port forwarding is enabled, the IP Camera is allowed to
open the web server port on the router automatically.
NOTE: To enable this function, please make sure that your
router supports UPnP and it is activated.
• Friendly name
Set the name for the IP Camera for identity.
FCS-1131
FCS-1141
FCS-3071
FCS-1131