FCS-9364 OneSecure Video Management Software, 64-Channel Amdinstrator Manual For Version 3.0.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 About This Manual Target Audience This manual is intended for System Administrators who are responsible for installing and setting up the OneSecure surveillance system. The reader is expected to know the fundamentals of IP surveillance system integration and to own the administrative privileges to achieve all the tasks.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Conventions Used in This Manual The following are typographic conventions used in this manual: Bold: Bold typeface is used for a keyword, major functions of NVR, or a title of a section/column. Italic: Italic typeface is used for a filename or location path. Underlined: Underlined typeface is used for a document name or hyperlink.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Table of Contents 1 About This Manual 2 Target Audience..............................................................................................2 Content Overview ..........................................................................................2 Conventions Used in This Manual................................................................3 2 Table of Contents 4 3 Overview 9 NVR Server / Client Architecture ...............
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Access NVR Server via Internet Explorer .................................................23 From Server Computer Using Local Client................................... 23 From Remote Client Computer .................................................... 23 Accept ActiveX Controls Installation Requests ............................. 23 Login Failure Troubleshooting ......................................................
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Add Non-LevelOne Cameras ....................................................... 42 Manage Multiple Devices ............................................................................44 Modify Basic Connection Settings ................................................ 44 Delete Devices ............................................................................. 44 Copy Settings Across Devices ...................................................
OneSecure Video Management Software Amdinstrator Manual V3.0.09 How to Setup FTP Settings for Event Rules ................................ 78 System Log....................................................................................................80 Define Search Time ..................................................................... 80 Choose Log Type ......................................................................... 81 Read the Log ...........................................................
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Un-install Server Software ........................................................................109 Step 1: Remove OneSecure Server Program ............................ 109 Step 2: Remove OneSecure Server Program Folder (Optional) 110 Step 3: Remove the Recordings Folder (Optional) .................... 110 Back Up System Data ................................................................................
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Overview OneSecure is a Windows-based software that provides distributed network video surveillance solution with full functionality. This software supports centralized management, scheduled recording, real-time monitoring and recording of up to 100 video streaming devices from local or remote network, with rule-based services to trigger multiple schedules and events.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 System Installation Check List Pre-installation Item Task Description 1 Prepare software license OneSecure comes with 64-channel free license. For additional channels, please purchase the license from your system supplier and get the license information ready before activation. Make sure the computer’s hardware spec, operating system and IE browser version are compatible with software requirements.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Settings on page 46 Configure Recording Schedule By default, each device will start 7/24 schedule recording as soon as it is added. Set recording schedule for each device. 13 Configure E-mail & FTP settings Complete the E-mail or FTP settings and test if NVR server succeeds in sending e-mails and uploading files. This step is necessary if you will use these functions for Event Handling. 14 Configure Event rules Set the event rules.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Getting Started System Requirements The Minimum CPU Processor spec will provide acceptable performance for systems that use mostly MPEG4 streams. Surveillance systems that use 4 or more H.264 streams should satisfy Minimum CPU Processor spec for good performance. PC Spec Number of Live Channels (*2) CPU Processor Minimum Recommended Server + Local Client PC 1-16 Intel Core 2 Quad 2.4GHz Intel i5 2.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 computer’s multi-tasking capability by adding more RAM, you will need a 64-bit version of Windows to take advantage of it all. Please visit the link below for more memory limitations on various Windows platforms. http://msdn.microsoft.com/en-us/library/aa366778%28VS.85%29.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Prerequisites These prerequisites below are necessary before installation: 1. Suitable System Specifications Ensure that the server computer meets the minimum system requirements, and that the server computer has C Drive. 2. Uninstall Previous old OneSecure Server OneSecure NEW server and Old server cannot co-exist on the same server computer.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 3. Move the slider to “Never notify position”, and then click “OK”. You will have to restart the computer for this change to take place.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Server Installation The server program installation is as easy as 1-2-3 by following the installation wizard’s instructions. The server would start its service right after installation completes, without the need to restart the server computer. Install the Software 1. Execute the install shield application . 2. Follow the onscreen instructions of Install Shield Wizard and proceed.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 3. The IP Port Checker will pop up to confirm the NVR port number with you. The installation program will use 80 as default. You may enter another available port number in “Listen Port” field and click “Apply”. You may just click “Apply” if you are not sure whether this port has been taken or not. If the port is being used by another service, you will be asked to input another available port number. 4.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 5. After the installation completes, connect to http://localhost:port number with Internet Explorer browser, you will see NVR Login page. Note If IIS Web Server has been installed on the computer and you are asked to restart the computer during installation process, please 1. Choose to restart right away. 2. After the computer reboots, this install shield will continue to complete the installation.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Workstation Installation NVR Workstation includes a set of programs that provide interface between users and the NVR server. It may be installed on the same PC as the NVR server, or they may be installed separately and connect to NVR Server via network. Install the Software 1. Execute the install shield application . 2. Follow the onscreen instructions of Install Shield Wizard and proceed. on the desktop to execute the application. 3.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 License and Activation In OneSecure system, your required number of channels should be licensed and activated before connecting the devices. The License Key, provided by LevelOne sales representative once your purchase of license is carried out, will be used to activate the license. After the license activation, the channels on NVR server will automatically become available.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 You can activate the licenses on your NVR through Offline Activation. Offline activation does not require Internet access for NVR server. It is used when NVR is located in network not connected to public Internet (e.g. in a military base). You will need to get an activation file from another computer and transfer it to NVR server computer.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Verify Your License Once your license is successfully activated, the license information will be shown on License page. Activated Standard License Activated CDP License Important The license data will be erased once OneSecure Importantserver Noticeis uninstalled. Be sure to retain your license key information in a safe place because you may need to reinstall the software.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Log In to the System Access NVR Server via Internet Explorer From Server Computer Using Local Client Open Internet Explorer. If your computer is where OneSecure is installed, type http://localhost/ or the computer’s ip address in URL box. From Remote Client Computer A remote client refers to any client using a computer over WAN or LAN other than server computer.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Login Failure Troubleshooting Once you confront with problems accessing NVR server, refer to the possible conditions below and follow the instruction to solve your issues.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 3. Press down “ctrl”+ “alt” + “Delete” keys to bring up Windows Task Manager. Select “View”, and then “Select columns”, and enable the “PID (Process Identifier)” to appear on search results. Please also make sure “Show process from all users” is enabled. 4. On Task Manager Process tab, locate the PID number of the service using port 80. The service name is shown under “Image Name” column.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Cause 1: Your Internet Explorer browser version does not support OneSecure. Solution: Make sure your browser is 32-bit version. Cause 2: Your browser restricts the installation of add-on components. Solution: Internet Explorer security settings may restrict the installation of add-on components.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Login A. Enter Account & Password Account (non case-sensitive): A Admin (default) Password (case-sensitive): B 123456 (default) C B. Change UI language To change UI language, select the desired D language from “Language” dropdown list. C. Remember Account/Password To have the server remember your Login Account and Password for future, check “Remember Account/Password”.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Access NVR Server via OneSecure Workstation OneSecure Workstation includes a set of programs that provide interface between users and the NVR server. It may be installed on the same PC as the NVR server, or they may be installed separately and connect to NVR Server via network. Double-click the shortcut icon of your OneSecure Workstation on your desktop to execute this workstation application.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 E. Remember Login Information To have OneSecure Workstation remember the Account, Password, your choices of Initial Page and UI Language, simply check “Remember login info”. Click “Don’t Remember” will clear your input text and reset to default. To directly enter the desired page every time you log in from this PC , check “Remember login info” then “Auto Login” to skip the Login page.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 5. You can export the saved server sites, or import it to another Workstation client computer. Access NVR server via OnewSecure Workstation, go to Setup page System tab Workstation. A. Export current server sites list Click “Browse” to select a folder to save the list, and then click “Export”. This file will be saved as an *.xml file. B. Import a server site list Click “Browse” to select the *.xml file, and then click “Import”.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Set up the System This chapter will guide you through everything you need to know in System Setup procedure from first time connection with OneSecure server to general system configuration. Setup Wizard Once you connect to OneSecure for the first time, Setup Wizard will guide you through the initial setup process. You may click “Previous” or “Next” button located on the lower right at any time.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 System Settings You can adjust the E-mail & SMTP settings, FTP settings for event rules now or later. For more details about the settings, please refer to How to Setup SMTP Settings for Event Rules on page 77 and How to Setup FTP Settings for Event Rules on page 78. Storage On NVR server, you may choose which disk drives to store the recording files, and decide how much memory space is left for all computer applications to run.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Licensing This is the license management section. On lower right part of the screen shows number of channels allowed under your current license. Each NVR server has a license for 64 channels that is already activated. You can click “Next” to next setting if you do not want to add new license for now. For more details about the settings, please refer to License and Activation on page 20.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 NVR Main Screen You will enter the live view screen after Setup Wizard. On the right are link buttons to three NVR major functions: (1) Live view, (2) Playback and (3) Setup. You can click the orange button to enter the function page.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Add Devices Cameras or video encoders are the fundamental building blocks of surveillance systems. To manage cameras from OneSecure, you have to add camera devices into OneSecure system first. In this section, we will guide you through how to add or delete devices on the OneSecure system. To start adding new devices, please follow these steps: 1. On Setup pageHome screen, click “Device”. 2.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 3. There are three ways to add devices into the system, Search Devices, Search ONVIF Devices, and Add Device Manually. - Use Search Devices to auto search LevelOne cameras located in the same subnet as your NVR server. - Use Search ONVIF Devices to find devices that support ONVIF in the same subnet as your NVR server.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 2. Select the row of the camera you wish to add to the system and repeat this step until you have checked all the devices you need. Please note that the list of devices is shown regardless of the account name and password. You can choose to add all shown devices. For those with different account and password, you will be prompted to fill in the correct credentials to in order access the video feed.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Important Notice 1. For certain devices, you may need to configure the ONVIF user credentials of the camera by accessing its Web Configuration page and managing the ONVIF Users List. 2. Functions supported for devices added through ONVIF are live streaming and adjustments to video image settings. Add Devices on WAN or Other Local Area Networks 1. After selecting “Add Device Manually”, the camera settings page will appear as below.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Important Notice If any of the required fields is incorrect, NVR will not be able to connect the device. When you have any device connection problem, please check these settings. However, at this point, you may skip filling in the Device Name, Brand, Model, and Stream Mode configuration. 2. Click “Get Device Settings” to have NVR contact the device and get the live view.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 IP address Enter the camera’s IP address or host name. Brand Select the manufacturer of device. Model Select the device model of the IP cameras / video servers. In most cases, this is automatically filled in after you click Get Device Setting. 1 Select one of the streaming modes this device supports. 2 The channel ID you set for a stream of a multi-streaming device. Stream Mode* Channel No.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Status Icon Description Icon Status Description NVR server cannot retrieve video streaming. This may be that a video server is not connected with cameras, or that the streaming is blocked by the firewall between the device and NVR server. Please (1) ensure the device side is well connected and can output video normally,(2) check the firewall and port forwarding settings. This device’s settings have been modified but not saved yet.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Add Non-LevelOne Cameras In this section, we will guide you through how to add devices to OneSecure system. After the required CDP license is activated, please: 1. Use the utility provided by camera manufacturer to confirm the camera properties: (1) Protocol, (2) IP Address, (3) HTTP Port, and (4) User Name & Password. 2. Log in to NVR, go to Setup page “Device” tab, click “Add Device”, and select “Add Device Manually”. 3.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 If the device you wish to add supports ONVIF, you can select “ONVIF” for Media Type, and the settings page will appear as below. Please fill in the five marked fields shown below that are required to communicate with the device - Media Type, Camera IP, HTTP Port, User Name, and Password, and then click “Apply”. 4.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Manage Multiple Devices After adding several devices to the system, you may get an overview of all devices on Setup pageDevice tab; this is where you may use certain fast and convenient approaches to manage a number of devices. In this section, we will guide you through how to quickly add or delete multiple devices.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Copy Settings Across Devices When setting a large number of devices, many settings will resemble other ones, and it is sometimes tiresome to repeat every setting again and again. You can use the Copy function to save the hassle of needless repetition. LevelOne FCS-4043 1. On All Device List, select the source device whose settings are to be copied from. You can select only one device to be the source. 2.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Settings Copied to Target Devices Target Type Settings New Device Existing Device Basic All All except Device Name, IP Address, HTTP Port, RTSP Port, User Name and Password Video All except Motion Settings, Video Adjustment PTZ All except PTZ Preset Points and Commands Note 1. You can only choose either “Add New Device” or existing devices as target. 2.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Configure Device Settings After adding a device to NVR, you may continue to configure its video, motion detection, PTZ or preset tour settings on Setup pageDevices tab. In this section, we will guide you through how to configure these settings and their corresponding functions.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 you have selected “Unlimited” for Maximum Bitrate. The actual value will fluctuate slightly based on scene changes. 1 * 2 * 3 * 4 * 5 * Available when NVR is connected to a multi-streaming device. Available when NVR is connected to a hemispheric device. Available when NVR is connected to a hemispheric device whose Mount Type is set to “Wall”. Available when “Video Encoder” is selected as MJPEG.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Event Recording with Frame Rate Adjustment Keeps recording all the way without losing any single moment; lower frame rate can be set for non-event recording, which consumes only a little storage.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Scenario B: Suppose you wish the system to record 24/7, the non-event recording to be kept at very low frame rate. Please set the event and schedule recordings at different frame rate, you will need to enable “Set Frame Rate for Event Recording Mode”, and set the “Non-event Frame Rate” and “Active Event Frame Rate”.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Video Adjustment Attributes Field Category Field Name Description Video Flipping/ Check this box to flip the video vertically and horizontally Video Mirroring to achieve a 180-degree rotation effect. Brightness Select the Brightness value (0-100). The higher the value, the brighter the image. Contrast Select the Contrast value (0-100). The higher the value, the more obvious the separation between light and dark.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 White Balance Select between “Auto” or “Manual” White Balance mode. White balance refers to the device’s ability to accurately define “true white” color. In Auto mode, the camera will attempt to recognize the “true white” color and adjust the image accordingly. In Manual mode, you can configure the White Balance by adjusting the R Gain and B Gain value manually.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Configure Motion Settings To make use of the motion and PIR detection functions supported by your devices, you need to configure the detection regions and settings. Once a motion is detected, OneSeucre can trigger events and recording, bring up instant pop-up windows and show the detected area on live view.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 4. When the setting is finished, click “Apply” to save, then “Close” to exit this page. To check or modify the regions you set, please go through clicking “Get Motion Settings”, Motion Setup” and then “Motion Enable” buttons, the saved regions are already selected on the list, select one to proceed. Adjustment Attributes Field Name Description Sensitivity(1-100) Determines how sensitive the camera reacts to the movement.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Configure PTZ Device PTZ devices can do panning, tilting and zooming automatically or through manipulation. The PTZ-related applications are broadly supported by OneSecure. For example, you may control the movements of a PTZ camera with user interface panel controls or a LEVELONE joystick; the device can be programmed to execute a continuous tour or triggered by events to go to a preset position.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Parity is the data validation mechanism for analog devices that use serial port interface to send or receive data. When choosing parity mode other than "none", the data packets will be validated for possible data losses so that failed command could be re-sent if necessary. Please refer to the parity setting of the analog device and choose exactly the same parity setting also in NVR.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 LEVELONE Live Preview LEVELONE There are two kinds of PTZ navigation: Optical PTZ Navigation 1. Get the live view from Live Preview window: Make sure the “Enable PTZ” is checked, a red crosshair will appear on the Live Preview window, if the device is in Dual Stream mode, this window will always shows the stream set for live view. You may click on 2. to switch between the streams.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 3. Use panel controls to operate PTZ movements: Click a button on the panel to start, the red crosshair will appear in the view. 8 directional buttons Zoom in / Zoom out Focus in / Focus out Widen / Narrow the Aperture Note 1. The zoom buttons are only applicable for those devices supporting optical zooming. 2. The focus buttons are only applicable for devices with controllable zoom lens.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Set PTZ Preset Points With PTZ devices, you may define a view by where to look (through panning and tilting) and how close (through zooming) to zoom. Once these views have been saved in NVR server as preset points, the device can always point to this view upon the event triggering or user’s command. 1. Go to Setup page Devices tab, select the device from Device List, and click PTZ tab. 2.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Set PTZ Command If your speed dome or PTZ device has a special function not supported in the standard protocol, you may input it in PTZ Command list and execute it. Ex: Activate the wiper to clean the window of the PTZ. 1. To add a PTZ action command, go to Setup page Devices tab, select the device from Device List, on PTZ tab, check the “Enable PTZ”. 2.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 1 2 3 4. After a tour is saved, it is available on Live View pagePTZ control panel. Note The preset points and tour set in OneSecure are independent from those you set on device. If you have already defined certain preset points or tour on device, they will not be brought to NVR system. On the other hand, the settings on OneSecure will not write to the devices.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Full support for all types of dewarped video stream output from fisheye cameras with in-camera dewarping capability. NVR’s software algorithm can perfectly corrects the original fisheye images, generating 6 specific fisheye view modes from User’s usual perspective. Based on user’s instant request for changing view mode or PTZ view point, NVR server will process the original fisheye image and respond to the client individually.
OneSecure Video Management Software Amdinstrator Manual V3.0.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Four small user-defined cropped regions Quad 1 3 3. 2 4 ePTZ After the configuration is done, remember to click “Apply” to save the settings.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Schedule Recordings Unlike the traditional analog surveillance system, the IP surveillance system provides a target-oriented recording schedule for devices; the view of each device can be recorded based on your required time segments and event types. For example, you may have a camera installed on the office ceiling do continuous recording during work hours, and record only upon the triggers (incidents that detected by system) at night.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Post-event Recording Buffer (sec): This will determine how long after the event is triggered should be included in the event recording file. Available choices are 10, 30, 60, 120, 180, and 300 seconds. Keep Recording Files OneSecure will keep recording file of specific device for the number of for (1-999 days): days you set here. The default value is 30, if you want to modify it, please check the box to start configuring it.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Set the Schedule Here you can configure camera’s recording schedule on 7 days / 24 hours basis. The schedule is split into segments of 20-minute-length. By default, once a device is added to the system, its schedule is automatically set to full time schedule recording and event handling. You should configure it according to your system plan. Go to Setup-Schedule tab, on Schedule Setting panel: 1.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Use Time Setting Quick Buttons to Set the Time in One Click Select the recording mode, then click one of these buttons to apply the mostly-used time settings. Click Click to apply schedule for all day. to apply schedule from 06:00 to 18:00 every day, with the settings for the rest of the time track being cleared. Click to apply schedule from 18:00 to 06:00 every day, with the settings for the rest of the time track being cleared.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Click to clear all schedule setting in this device. Lock Specific Days Clicking the day of the week will lock/unlock that day from schedule setting. You can shield schedule on a certain day from being changed by changes in other weekdays. You may easily set just the weekdays or the same time over the same week this way. To do this: 1. Click the days to shield them. 2.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Copy an Existing Schedule to Others With plenty of devices in your system, it happens that you want to apply the same schedule to multiple devices. After creating a schedule for one device, you can copy it to other cameras. 1. Go to Setup page Schedule tab, on Device List, select the device you want to copy schedule settings from. 2. Click the “Copy” button. 3. On popup window, select target devices you want to copy schedule settings to. 4.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 View the Entire Recording Schedule On Setup page Schedule tab, click All Devices on Device List, an overview of all device schedules will be listed on the right. The below list explains the status of different bar patterns: Icon Recording Function Description Schedule recording. During this period, device view will be recorded continuously. Event handling. During this schedule, the event rules you set are active.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Event Management When something happens on camera site, such as someone walks by, the door opens or closes, a fire breaks out or the sun goes down – these are all Events. Events which occur in the environment or were preprogrammed in the camera may be used as Triggers. Triggers cause the device to react with Responses. The link between trigger and response is governed by Event Rules.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 How to Edit an Event Rule 1. Go to Setup page Event tab. All the editable event rules are listed in the device ID order. 2. Select a device from the Device List on the left. Based on the trigger types this device supports, the corresponding events rules are listed accordingly on the right. In this example, this selected camera model supports three motion detection regions, and hence three MD trigger event rules are available. 3.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 You can enable multiple responses by first checking the box(es) to enable the items: Action Items Function Description This kind of action will focus your attention on the channel when triggered. Pop-up: Brings up event pop-up instant playback window of selected channel upon trigger. You may also define the display duration of video on the window. Hot-spot: Displays video in Hot-Spot window (red flashing frame) upon event.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Set the DO to become ON or OFF upon trigger, only the devices supporting DO functions can be the target devices. Enable NVR to execute a certain command upon this event. You can use it to integrate NVR’s event handling with other programs. Enter the path of the command to be executed upon event. Enable NVR to upload snapshots to a FTP site upon this event.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 6. To check if this rule is successfully set, please make sure you have properly configured the involved (1) trigging side settings like Motion Detection Regions or DI, (2) response side settings like PTZ Preset Points, SMTP Server and E-mail Recipients, FTP Server or DO. Then set the Event Handling schedule for current time and trigger this rule. Note 1.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Delete the Event Rules On Event List, select the rules you wish to delete, and then click “Delete” to clear this rule. How to Setup SMTP Settings for Event Rules OneSecure supports e-mail notification for Event Handling sent through an SMTP server. You can specify the e-mail and server settings here. 4 2 3 1. Go to Setup pageSystem tabSettings E-mail& SMTP Settings. 2. Fill in each of the following fields.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Field Name Server Description Input the sender’s SMTP server address. Only alphabets, numbers, and the symbols (.), (_), (-) are valid. SMTP Port Set the SMTP port, allowed value is from 1~65535, default is 25. Account Input the name of the SMTP server account. Only alphabets, numbers, and the symbols (@), (.), (_), (-) are valid. Password Input the password of the SMTP server account. Only alphabets and numbers are valid.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 2. Fill in each of the following fields. Field Name Server Description Input the FTP server address. Only alphabets, numbers, and the symbols (.), (_), (-) are valid Port Set the FTP port, allowed value is from 1~65535, default is 21. Account Input the name of the FTP server account. Only alphabets, numbers, and the symbols (@), (.), (_), (-) are valid. Password Input the password of the FTP server account.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 System Log The activities performed by logged-in Users are recorded on server as System Log. With the access permission, a user may view, search and export this record for analysis or investigation. This section will provide the instructions on how to read and search data in the system log. “System Log” is one of the resident buttons on top of NVR server user interface, click it to enter search window.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Choose Log Type You may filter the logs by Type, User Account, and Device by selecting from dropdown list, then click “Search”. By default, all types are selected. Read the Log The search result will show 1000 records before and after your query time. You may click the pagination buttons to navigate earlier or later records. If there is an icon on the right top corner of an entry, click it to view the full description content.
OneSecure Video Management Software Amdinstrator Manual V3.0.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Storage Management This section describes how to manage storage space in NVR. Please note that this section only deals with the overall storage rules, and not storage of individual channels. Please note that as NVR continuously writes and deletes file from the disk drive, using a removable disk may risk losing recording when device is removed while being accessed. Go to Setup pageStorage tab.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 2. After selecting the disk drive, please set the deletion rule. There are two ways to delete recordings, when both are active, NVR server will start to delete old files when any of the criteria below is met: (1) Keep the recordings for a number of days, and delete files older than this period by 1 GB at a time. Please go to Setup page Schedule tab to set it.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Manage User Groups/ Users The User Groups/Users page allows you to (1) manage the access permissions of different user groups, (2) add users to or delete them from user groups, (3) and assign users to specific user group. This chapter will take you through these settings. Access Permissions In OneSecure, the access permissions are managed by User Groups. User Groups defines what functions and devices are allowed for each user.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 domain network. As OneSecure runs on a server computer logged on to the same domain with Active Directory server, you can import a user account or a group from those concurrently existing in Active Directory into NVR server. In this way, the user identification is processed by Active Directory centrally; there is no need for NVR administrator to maintain user accounts as long as they are under management of Active Directory service.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 The domain users within that group will all be added to NVR server at the same time. To view the whole users within this group, please select and enable the “Show users in domain groups.” The account information of these domain users, unlike those user accounts you add one by one to NVR server, are not editable on Users page. Domain users added as a whole group 2. Assign NVR Permissions for created group.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 You may copy the Device Permissions Settings to other devices. Click “Copy” under Device Permissions tab to bring up the target device menu, check the target devices, and click “Apply”. Click “Apply” on the top to save the settings. Add Users To create a user account with on NVR server. 1. Select , and click Add button. 2. Select User Type as Customized User or Domain User.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Note NVR server provides a procedure to help Users who have forgotten the password retrieving the original information, which relies solely on the “e-mail address” authentication. It is strongly recommended that you input an e-mail address that this User has access to when you establish the User account.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Domain Users Management As NVR server computer is logged on to a domain Active Directory, it can import a user account from Active Directory. Domain: company.com Active Directory OneSecure Server Domain Controller This type of User account is “Domain User”. Upon being added to NVR server, the User properties stored on Active Directory database including (1) account name (2) e-mail address will be imported to NVR server.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Customize Views After all devices are configured, you may start customizing the views for different users and purposes. This chapter will teach you how to add video source, arrange the channels and manage live view layouts. In OneSecure system, a View refers to the layout where the live images of Cameras or Maps are placed in proper positions to suit the monitoring purpose.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Step 1: Create a New View On View Tool Bar, click the Create View button , input the View Name, add a New Group for this View and decide whether this group is to be Public or Private, and then click “Apply”. The views under Private View Group The views under Public View Group are only available to the User who created them. are open to every User.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Step 4: Add Video Source In edit mode, move the mouse over the channel and click . You may also directly pull a camera from the Device panel to your desired channel. Remove the camera view: right-click on the channel and select “Remove”. Step 5: Add a Map By adding a map, you put a picture on the channel, where you may place camera icons to make it an “e-Map. In edit mode, move the mouse over the channel and click to upload a map.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Map brightness: To change the map brightness, right-click on the map, select “Map Mask” and the brightness percentage level. Map size: By default, the map will be displayed in its original size. Use the button s on upper right to adjust the map size. Enlarge to fill channel height Original image size Zoom in Zoom out Edit map title: The map title will be shown on channel title bar.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Manage maps: All the uploaded images are managed under Map Image Manager. On Live View screen, you may go to Map Image Manager to view, upload or delete the maps. Step 6: Add Devices to the Map Pull a device from Device List to the map. To remove this device from map: Click To move this device: Left-click on the device icon and drag.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 To adjust precise pointed direction: Right-click on the device icon, select “Pointed Direction”. To adjust device’s viewing angle: Right-click on the device icon, select “Vision Angle”. Step 7: Adjust the Channel Size & Layout Adjust the channel size: Click on right lower corner of the channel window, drag and then release.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Step 10: Set Default Hotspot Channel (Optional) By system default, the global hotspot channel will always be the top left one. You can set any other channel on your live view screen to be the default hotspot channel. Right-click on the channel and select “Default Hotspot” , then click on View Tool Bar to save it. Step 11: Set Fisheye Camera Mode Define a view for a fisheye camera channel by selecting its mode and using ePTZ control.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 To reset the ePTZ navigation area back to default viewing angle, right-click to bring up channel menu, and then click “Reset”. 3. click on View Tool Bar to save the configuration.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Set View Link By creating a link button on a map view, you can directly be linked to another specific view by clicking the button. On the picture below shows how to create a link button to 7F View on 11F View. 1. Select a View, on which you will place a link button to another view. 2. Click on View Toolbar to enter edit mode. 3. From View List, drag the target View to current View, a link button will appear. 4.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 On View Toolbar, click then select Create Patrol. 1. Input the Patrol Name 2. Select the Patrol Type to be either available for all Users or to the creator’s account only. 3. Define the Global Dwell Time between the views. If you want to set different dwell time length for individual Views, do not check this option, and configure them separately in the table below. 4. Choose the Views to display in patrol.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Tips to Enhance Live View Performance Live view for multiple channels requires sufficient computing power to run the performance. In certain extreme cases, like when viewing several megapixel H.264 video streams at the same time, client computer will be overloaded and hence affect browser’s performance. This is a common limitation imposed upon all Windows based video management programs and web browser.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Setting. Let Windows Automatically Start with NVR Live View You may have the client application automatically run and open the live view after Windows starts. In this way, you may save steps and time before you eventually see the desired live view screen. Additionally, whenever a power breakdown takes place, the live view may recover as soon as your computer resumes.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Customize System Language NVR server supports multiple languages for user interface display. There are already 10 translated language files in the server system. Each language is open to customization based on your own needs. This section will describe how to choose or customize language strings for your site. System Languages List You may decide which languages to be selectable on Login screen.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Edit User Interface Wordings Each language file contains four editable string tables. Each table displays the default wordings in English and the translation in target language. To view each table: 1. Select the language from “Select Language” dropdown list, then select a table from the “Language List” list on the left column. 2.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Export / Import Language String File You may also click “Export” to export the language file as .xml format to edit in Notepad, or “Import” to import a language file to use in the system. In general, it is suggested that you always save a modified language table with a different file name in a location other than default system language folder, then import it to use. In this way, you can avoid overwriting the original language file.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Display Configurations You can change the user interface style by arranging the main screen and Panel/Device List on the right or left. Go to Setup pageSystem tabSettings, in User Interface Style section, select the setting style then click “Apply”. The change will be applied upon your next login.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Video & Snapshot Export Configurations The snapshots taken by Users on Live View and all exported video files are saved to a default file location, and you may configure the destination on NVR server. Go to Setup pageSystem tabSettings, in Export Video Settings section, click “Browse” to choose the Export file path.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Joystick On OneSecure, other than user interface PTZ panel and mouse operation, you may also control the PTZ movements by physical controllers. OneSecure supports two types of controllers, which both feature in a joystick and twelve buttons for users to assign specific actions. Model: Extreme™ 3D Pro Manufacturer: Logitech Model: IP Desktop Manufacturer: CH Products Joystick Configurations 1. Log out from NVR server. 2.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Un-install Server Software In certain cases, un-installation of NVR system is necessary, for example, (1) you want to terminate NVR server and clear all the evidence due to privacy and security reasons, (2) you need to reinstall the system due to an unsuccessful installation.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Step 2: Remove OneSecure Server Program Folder (Optional) If you are performing a complete un-installation without leaving any NVR server related data on the current computer, you may consider deleting this folder. After un-installation, the OneSecure system folder will remain under the Program Files folder on your hard drive, the system configuration data here will not be removed until you delete them manually.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Back Up System Data Making regular system backups is always recommended in case of unexpected disasters or accidents that may damage NVR server. Other than this, you may need to perform an on-demand backing up to (1) migrate the whole NVR server data to another computer, or (2) re-install the NVR server on current computer.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Important Notice 2. The license data is not included in the system backup file. You have to preserve the license key information provided in e-mail or printed card to you after the purchase takes place. Step 2: Back up Recording Files Folder (Optional) Back up the whole Recordings folder(s) that saves the recorded video files on storage hard drive(s).
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Restore System Data Before starting restoring the system, make sure you have done the following: (1) Re-activate the license. If you have done un-installation previously, and the number of channels to be recovered is over 16. Please prepare the license key information for online activation or the activation file(.lic) for offline activation, and follow the instructions in License and Activation on page 20 to activate your license.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 System Migration NVR server system migration is necessary when you need to replace your current server computer. The migration process will involve a series of different procedures including backup, un-installation, installation and restoration, which should be executed carefully to prevent from loss of important data. You should go though the instructions of required procedures before the migration starts.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Advanced Administrative Tasks To assist the NVR administrator in monitoring the server status and basic trouble-shooting, the OneSecure Administrator Tool is installed along with NVR server program on the server computer. This tool will start running as the server computer starts up, and resides in the system tray. You may double-click the icon to open this tool. NVR Server Status You may observe the NVR services status on Service tab.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Change Authentication Method You may enable the Digest authentication other than the basic way. With this method, User’s credentials are encrypted using MD5 algorithm. In this way, there is more secure protection to prevent from unauthorized access. Please also note that, with Digest authentication method enabled, a mobile client user or a domain user will be blocked from NVR system.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Set an NVR Server as a Redundancy Server You can assign an NVR server as a redundancy server for other NVR server. During this time, the original settings and recordings of this server will all be overwritten, therefore, it is suggested that you prepare a specific computer to be dedicated to carrying out the redundancy tasks.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 License Registration With a successful purchase, you will receive a license key for registration 1. Enter Administrative Tool interface y clicking the icon on Windows taskbar. 2. On Settings page, select “Redundancy Server”. You can switch the server mode to the other here. 3. The other relevant settings pages will then appear. Enter “License” to start registering.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 After the registration, the license information will appear on this page.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 Set up Redundancy Server 1. Go to the “Storage” page to set up the storage space configuration 2. Go to “Target” page to edit the list of the target NVR servers. Click “Add” and fill in the connection properties of the NVR server and click “Apply”.
OneSecure Video Management Software Amdinstrator Manual V3.0.09 3. After you click “Yes” to confirm ths configuration, this NVR will immediate turn into an redundancy server on a first-come-first-serve basis. By entering “Service” page, you can observe the service status.
