Network Attached Storage User's Manual FNS-5000, FNS-7000, GNS-8000

update is the correct version and read through the instructions carefully. It is wise to back

up all existing data on the LevelOne NAS prior to performing system software update.

The current settings will remain unchanged after the system is upgraded.

• Change Logo

You can place a picture that you desire on the upper right corner of the home page. The

size of the picture cannot exceed 20K

• Tape Backup (For GNS-8000 Only)

The tape backup tools allow you to perform the backup or restore jobs using a tape

drive with ease. In principal, there are two different types of backups: Full Backup or

Incremental Backup. Full backup will back up all the files in the backup source.

However, the incremental backup will only back up any modified or new files after

last backup.

Backup Now

To back up the files to the tape right away, you can run an immediate backup job.

Restore

To restore from the previously backup tape, you can perform the restore operation.

Scheduled Jobs

You can schedule a backup job to be executed automatically at any later time

periodically.

Tools

There are several useful tape functions to operate on the tape drive. For example, you

can rewind, eject or erase the tape here.

Job Status

You can review or monitor the status of the backup or restore job.

Note:

1. The SCSI tape drive has to be properly connected and turned on before

starting the system, or it will not be detected.

2. The HVD (High Voltage Differential) SCSI tape drive is not supported by

this system.