Network Attached Storage User's Manual FNS-5000, FNS-7000, GNS-8000

Operation Help

1. Set up your LevelOne NAS:

Select the LevelOne NAS that you want to configure, and then click on the

Configure button. An authentication window asking you to enter the administrator’s

password appears as shown below:

Click on OK after entering the password.. If the name and password are correct, the

configuration window is displayed on the screen:

Change the settings and click on OK when done to complete the configuration

setup.

Note:

1. After changing some settings, you may be asked to restart the LevelOne

NAS.

Name for this LevelOne

NAS. You can input any

name you want except

special characters. The

maximum length is 14

characters.

Date

Time

Enter the IP address

exclusively assigned to this

server.

If this option is

enabled, the server

obtains the IP address

automatically from the

DHCP server.

If this option is enabled,

the server uses the IP

address settings

specified.

Exits and discards

changes.

Exits and saves

changes.

The IP address for the

default gateway that

connects to the Internet or

other network.

The subnet mask is used

to distinguish the

network ID and host ID

portions of the IP

address.