User Manual

Installing HP Web JetAdmin

Before installing the HP Web JetAdmin software, you must have domain administrator or

root privileges:

Download the installation files from HP Customer Care Online

at http://www.hp.com/go/webjetadmin/.

Follow the instructions on the screen to install the HP Web JetAdmin software.

Note: Installation instructions are also contained in the

HP Web JetAdmin install file.

Confirming Installation and Supply Access

Confirming that the HP Web JetAdmin software is correctly installed by navigating to it with

your browser as shown in the following. For example, http:// server domain port/ where

server domain is the host name of your web server and port is the port number assigned

during installation.

˙Supply users access to HP Web JetAdmin software by adding a link to your web server’s

home page that is addressed to HP Web JetAdmin’s URL. For example:

http://server.domain:port/

Configuring and Modifying a Device

Using your browser, navigate to HP Web JetAdmin’s URL. For example:

http://server.domain:port/

Follow the instructions on the appropriate home page to configure or modify your printer.

Note: You can also substitute the server domain with TCP/IP address.

Removing HP Web JetAdmin Utility

To remove HP Web JetAdmin software from your web server, use the uninstall program

provided with the software package.