- Level One Printer Servers User Guide

Level One Printer Servers
Print Server Mode - Bindery
If Bindery Print Server Mode is selected, the following screen will appear:
Figure 11: Bindery Print Server Mode
Data
Print Server Name
Change the name of the selected LevelOne Printer Server if you
wish. (This field is also on the Configuration-System menu.)
Master File Server
Name of the LevelOne Printer Server’s master file server
(NetWare server). Select from the drop-down list.
Polling Queue
Interval
Defines how often the LevelOne Printer Server will poll the
queues to be serviced. The default is 1 second.
Job Notification
by
Connection ID
Set to Yes to receive a job notification at only the workstation
where the print job originated, No to receive a job notification at
all workstations that you have logged on.
Buttons
Quickset
This option will configure the NetWare server using default
values. See below for details.
NetWare
Configuration
Use this to configure the NetWare server. See below for details.
See the following section for details
Help
View context-sensitive help.
Set to Default
Replace the on-screen values with the default values. These are
NOT saved until you click Save to Device. (No changes are
made to the NetWare server.)
Save to Device
Save any changes you have made to the LevelOne Printer
Server
Cancel
Ignore any changes made since the last Save operation; close the
window.
- 30 -