LevelOne User Manual FSW-0511 / FSW-0811 5/8-Port Fast Ethernet Switch V1.0.
FCC Certifications This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Package Contents • FSW-0511 or FSW-0811 • Power Adapter • User Manual • Wall-Mounting Kit Installation 1. 2. Please inspect the Power Adapter carefully, and make sure that it is properly connected to a power source. Power on. It will be automatically initialized and the LED indicators should respond as follows: a. All of the Link/Act LED indicators will flash momentarily, which represent a resetting of the system. b. The Power LED indicators will light up.
Features & Specifications y 5/8 auto-negotiation 10/100 Mbps Ethernet ports y Auto MDI/MDI-X at each port y Supports IEEE802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode y Data filtering and forwarding at full wire speed y Store-and-Forward switching technology Standards IEEE802.3 10Base-T, IEEE802.
LED Definition FSW-0511/FSW-0811 Front Panel PWR Link/Act This indicator will light up when the Switch powers up One LED indicator will light green when a device is connected to the corresponding port. It flashes when data is being transmitted or received on the connection. Rear Panel The rear panel of the FSW-0511/FSW-0811 consists of 5/8 10/100Mbps RJ45 Ports. All ports can work as the Uplink port.
Technical Support Thank you for selecting LevelOne products. LeveOne’s website contains the latest user documentation and soft-ware updates for LevelOne products. Please contact LevelOne Technical Support through our website. World Wide Web http://www.level1.
