User manual

176
3-17.2 Status
This page displays the loop protection port status the ports of the switch
Web Interface
To configure the Loop Protection parameters in the web interface:
1. Click Configuration, Loop Protection, Status
2. Evoke the Auto-refresh or click to refresh the Loop protection Port status by Manual.
Figure 3-18.2: The Loop Protection Status.
Parameter description:
 Port:
The switch port number of the logical port .
 Action:
The currently configured port action. .
 Transmit:
The currently configured port transmit mode.
 Loops:
The number of loops detected on this port.
 Status:
The current loop protection status of the port.
 Loop:
Whether a loop is currently detected on the port.
 Time of Last Loop:
The time of the last loop event detected.