User manual

C HAPTER 4 | Configuring the Switch
MLD Snooping
– 155 –
enabled on an interface if it is connected to only one MLD-enabled
device, either a service host or a neighbor running MLD snooping.
Fast Leave does not apply to a port if the switch has learned that a
multicast router is attached to it.
Fast Leave can improve bandwidth usage for a network which
frequently experiences many MLD host add and leave requests.
◆ Throttling - Limits the number of multicast groups to which a port can
belong. (Range: 1-10; Default: unlimited)
MLD throttling sets a maximum number of multicast groups that a port
can join at the same time. When the maximum number of groups is
reached on a port, any new MLD listener reports will be dropped.
WEB INTERFACE
To configure global and port-related settings for MLD Snooping:
1. Click Configuration, IPMC, MLD Snooping, Basic Configuration.
2. Adjust the MLD settings as required.
3. Click Save.
Figure 59: Configuring Global and Port-related Settings for MLD Snooping
CONFIGURING VLAN
S
ETTINGS FOR MLD
S
NOOPING AND QUERY
Use the MLD Snooping VLAN Configuration page to configure MLD snooping
and query for a VLAN interface
PATH
Advanced Configuration, IPMC, MLD Snooping, VLAN Configuration
PARAMETERS
These parameters are displayed:
◆ VLAN ID - VLAN Identifier.