User manual

HAPTER

| Configuring the Switch

Quality of Service

– 194 –

■

Mapped – Controls the mapping of the classified QoS class values

and DP levels (drop precedence) to (PCP/DEI) values.

■

QoS class/DP level – Shows the mapping options for QoS class

values and DP levels (drop precedence).

■

PCP – Remarks matching egress frames with the specified

Priority Code Point (or User Priority) value. (Range: 0-7;

Default: 0)

■

DEI – Remarks matching egress frames with the specified Drop

Eligible Indicator. (Range: 0-1; Default: 0)

WEB INTERFACE

To show the QoS Egress Port Tag Remarking mode used for each port:

1. Click Advanced Configuration, QoS, Port Tag Remarking.

2. Click on any enter under the Port field to configure the Port Tag

Remarking mode.

Figure 80: Displaying Port Tag Remarking Mode

To configure the tag remarking mode:

1. Click Configuration, QoS, Port Tag Remarking.

2. Click on any of the entries in the Port field.

3. Set the tag remarking mode and any parameters associated with the

selected mode.

4. Click Save.