User manual

HAPTER

| Configuring the Switch

Quality of Service

– 203 –

a queue based on basic classification rules. (Options: 0-7, Default (use

basic classification); Default setting: 0)

◆ DPL – The drop precedence level will be set to the specified value or

left unchanged. (Options: 0-1, Default; Default setting: Default)

◆ DSCP – The DSCP value will be set to the specified value or left

unchanged. (Options: 0-63, BE, CS1-CS7, Default (not changed);

Default setting: Default)

WEB INTERFACE

To configure QoS Control Lists:

1. Click Advanced Configuration, QoS, QoS Control List.

2. Click the button to add a new QCE, or use the other QCE

modification buttons to specify the editing action (i.e., edit, delete, or

moving the relative position of entry in the list).

3. When editing an entry on the QCE Configuration page, specify the

relevant criteria to be matched, and the response to a match.

4. Click Save.

Figure 86: QoS Control List Configuration