User manual

C HAPTER 5 | Monitoring the Switch
Displaying Information About Security Settings
– 237 –
the client will remain in the unauthenticated state for Hold Time
seconds (see page 231).
◆ Last Authentication – Shows the date and time of the last
authentication of the client (successful as well as unsuccessful).
WEB INTERFACE
To display port Statistics for 802.1X or Remote Authentication Service:
1. Click Monitor, Security, Network, NAS, Port.
2. Select a port from the scroll-down list.
Figure 110: NAS Statistics for Specified Port
DISPLAYING ACL
S
TATUS
Use the ACL Status page to show the status for different security modules
which use ACL filtering, including ingress port, frame type, and forwarding
action. Each row describes a defined ACE (see page 96).
PATH
Monitor, Security, Network, ACL Status
PARAMETERS
These parameters are displayed:
◆ User – Indicates the ACL user (see "Configuring User Privilege Levels"
on page 60 for a list of software modules).
◆ Ingress Port – Indicates the ingress port to which the ACE applies.
Possible values are:
■
Any: The ACE will match any ingress port.
■
Policy: The ACE will match ingress ports with a specific policy.