User manual

HAPTER

| Monitoring the Switch

Displaying Information About Security Settings

– 241 –

◆ Receive Bad Remote ID – The number of packets with a Remote ID

option that did not match a known remote ID.

Client Statistics

◆ Transmit to Client – The number of packets that were relayed from

the server to a client.

◆ Transmit Error – The number of packets containing errors that were

sent to servers.

◆ Receive from Client – The number of packets received from clients.

◆ Receive Agent Option – The number of packets received where the

switch.

◆ Replace Agent Option – The number of packets received where the

DHCP client packet information was replaced with the switch's relay

information.

◆ Keep Agent Option – The number of packets received where the

DHCP client packet information was retained.

◆ Drop Agent Option – The number of packets that were dropped

because they already contained relay information.

WEB INTERFACE

To display DHCP relay statistics, click Monitor, DHCP, Relay Statistics.

Figure 113: DHCP Relay Statistics

DISPLAYING MAC

DDRESS BINDINGS

FOR ARP PACKETS

Open the Dynamic ARP Inspection Table to display address entries sorted

first by port, then VLAN ID, MAC address, and finally IP address.

Each page shows up to 999 entries from the Dynamic ARP Inspection table,

default being 20, selected through the “entries per page” input field. When

first visited, the web page will show the first 20 entries from the beginning

of the Dynamic ARP Inspection Table.

PATH

Monitor, Security, Network, ARP Inspection