User manual
C
HAPTER
5
| Monitoring the Switch
Displaying Information on RMON
– 248 –
PARAMETERS
These parameters are displayed:
◆ ID – Index of Statistics entry.
◆ Data Source (ifIndex) – Port ID to monitor.
◆ Drop – The total number of events in which packets were dropped by
the probe due to lack of resources.
◆ Octets – The total number of octets of data (including those in bad
packets) received on the network.
◆ Pkts – The total number of packets (including bad packets, broadcast
packets, and multicast packets) received.
◆ Broadcast – The total number of good packets received that were
directed to the broadcast address.
◆ Multicast – The total number of good packets received that were
directed to a multicast address.
◆ CRC Errors – The total number of packets received that had a length
(excluding framing bits, but including FCS octets) of between 64 and
1518 octets.
◆ Undersize – The total number of packets received that were less than
64 octets.
◆ Oversize – The total number of packets received that were longer than
1518 octets.
◆ Frag. – The number of frames which size is less than 64 octets
received with invalid CRC.
◆ Jabb. – The number of frames which size is larger than 64 octets
received with invalid CRC.
◆ 64 Bytes – The total number of packets (including bad packets)
received that were 64 octets in length.
◆ x ~ y – The total number of packets (including bad packets) received
that were between x to y octets in length.