User manual

C HAPTER 5 | Monitoring the Switch
Displaying Information on Loop Protection
– 254 –
WEB INTERFACE
To display LACP statistics for local ports this switch, click Monitor, LACP,
Port Statistics.
Figure 124: LACP Port Statistics
DISPLAYING INFORMATION ON LOOP PROTECTION
Use the Loop Protection Status page to display information on loopback
conditions.
PATH
Monitor, Loop Protection
PARAMETERS
These parameters are displayed:
◆ Port – Port identifier.
◆ Action – Configured port action, i.e., the response to take when a loop
is detected on a port.
◆ Transmit – Configured port transmit mode, i.e., whether the port is
actively generating loop protection PDUs.
◆ Loops – The number of loops detected on this port.
◆ Status – Current loop protection status of the port, i.e., enabled or no.
◆ Loop – Whether a loop is currently detected on this port.
◆ Time of Last Loop – The time of the last loop event detected.
WEB INTERFACE
To display loop protection status, click Monitor, Loop Protection.
Figure 125: Loop Protection Status