User manual

C HAPTER 5 | Monitoring the Switch
Showing MLD Snooping Information
– 266 –
SHOWING MLD
SNOOPING GROUP
INFORMATION
Use the MLD Snooping Group Information page to display the port
members of each service group.
PATH
Monitor, IPMC, MLD Snooping, Group Information
PARAMETERS
These parameters are displayed:
◆ VLAN ID – VLAN Identifier.
◆ Groups – The IP address for a specific multicast service.
◆ Port Members – The ports assigned to the listed VLAN which
propagate a specific multicast service.
WEB INTERFACE
To display the port members of each service group, click Monitor, MLD
Snooping, Group Information.
Figure 137: MLD Snooping Group Information
SHOWING IPV6 SFM
INFORMATION
Use the MLD SFM Information page to display MLD Source-Filtered
Multicast information including group, filtering mode (include or exclude),
source address, and type (allow or deny).
PATH
Monitor, IPMC, MLD Snooping, IPv6 SFM Information
PARAMETERS
These parameters are displayed:
◆ VLAN ID – VLAN Identifier.
◆ Group – The IP address of a multicast group detected on this interface.
◆ Port – Port identifier.
◆ Mode – The filtering mode maintained per VLAN ID, port number, and
Group Address. It can be either Include or Exclude.
◆ Source Address – IP Address of the source. Currently, the system
limits the total number of IP source addresses for filtering to be 128.
Different source addresses belong to the same group are treated as
single entry.