User manual

C HAPTER 7 | Performing System Maintenance
Restoring Factory Defaults
– 288 –
RESTORING FACTORY DEFAULTS
Use the Factory Defaults page to restore the original factory settings,
except for the management IP parameters.
C AUTION : To restore the factory defaults for all settings (including the
management IP settings), connect a cable from port 1 to port 2, and then
reset power to the switch.
PATH
Maintenance, Restart Device
WEB INTERFACE
To restore factory defaults:
1. Click Maintenance, Factory Defaults.
2. Click Yes.
The factory defaults are immediately restored, which means that no reboot
is necessary.
Figure 153: Factory Defaults
UPGRADING FIRMWARE
Use the Software Upload page to upgrade the switch’s system firmware by
specifying a file provided by LevelOne. You can download firmware files for
your switch from the LevelOne web site.
PATH
Maintenance, Software Upload
WEB INTERFACE
To upgrade firmware:
1. Click Maintenance, Software Upload.
2. Click the Browse button, and select the firmware file.