User manual

C HAPTER 4 | Configuring the Switch
Configuring Security
– 79 –
growth and plan for expansion before your network becomes too
overloaded.
PATH
Advanced Configuration, Security, RMON, History
COMMAND USAGE
The information collected for each sample includes: drop events, input
octets, packets, broadcast packets, multicast packets, CRC alignment
errors, undersize packets, oversize packets, fragments, jabbers, collisions,
and network utilization.
PARAMETERS
The following parameters are displayed:
◆ ID - Index to this entry. (Range: 1-65535)
◆ Data Source – Port identifier.
◆ Interval - The polling interval. (Range: 1-3600 seconds; Default: 1800
seconds)
◆ Buckets - The number of buckets requested for this entry.
(Range: 1-3600; Default: 50)
◆ Buckets Granted - The number of buckets granted.
WEB INTERFACE
To periodically sample statistics on a port:
1. Click Advanced Configuration, Security, Switch, RMON, History.
2. Click Add New Entry.
3. Enter the index identifier, port number, sampling interval, and
maximum number of buckets requested.
4. Click Save.
Figure 26: RMON History Configuration