User manual

16
PVID
When the VLAN-enabled switch receives a tagged packet, the packet will be sent to
the port’s default VLAN according to the PVID (port VLAN ID) of the receiving port.
Items Functions
Port Port Number 1~16
Egress Select “tagged” in the drop list to enable the PVID checking and tag
inserting of one port, and select “untagged” to cancel.
For example, if an Egress-tagged port receives an untagged frame, it will
be transmitted as a PVID tagged frame. For the detail tagging status,
please refer to the following table.
Untagged Tagged
Packet Frames
In
Packet Frames
Out
Packet Frames
In
Packet Frames
Out
Untagged Untagged Untagged Tagged (PVID)
Tagged Untagged Tagged (VID) Tagged (VID)
Pri-tagged Untagged Pri-tagged Tagged (PVID)
PVID Port VLAN ID(1~4094)
Only
tagged
Enable: block all un-tagged packets from accessing this port.
Disable: All packets are allowed to access this port.