User Manual

C HAPTER 3 | Using the Web Interface
Navigating the Web Browser Interface
– 112 –
Modify Modify priority for an MST instance 258
Add Member Adds VLAN members for an MST instance 258
Show Member Displays or deletes VLAN members for an MST instance 258
Show Information Displays MSTP values used for the bridge 258
Configure Interface
Configure Configures interface settings for an MST instance 262
Show Informaton Displays interface settings for an MST instance 262
Traffic
Rate Limit Sets the input and output rate limits for a port 265
Storm Control Sets the broadcast storm threshold for each interface 266
Auto Traffic Control Sets thresholds for broadcast and multicast storms which can be
used to trigger configured rate limits or to shut down a port
268
Priority
Default Priority Sets the default priority for each port or trunk 275
Queue Sets queue mode for the switch; sets the service weight for each
queue that will use a weighted or hybrid mode
276
CoS to Queue Specifies the hardware output queues to use for CoS priority
tagged traffic
279
IP DSCP to CoS Maps IP DSCP priorities found in ingress packets to CoS values for
internal priority processing
281
IP Precedence to CoS Maps IP Precedence priorities found in ingress packets to CoS
values for internal priority processing
283
IP Port to CoS Maps network applications designated by a TCP/UDP destination
port number in the frame header to CoS values for internal
processing
284
DiffServ
Configure Class
Add Creates a class map for a type of traffic 288
Show Shows configured class maps 288
Modify Modifies the name of a class map 288
Add Rule Configures the criteria used to classify ingress traffic 288
Show Rule Shows the traffic classification rules for a class map 288
Configure Policy
Add Creates a policy map to apply to multiple interfaces 291
Show Shows configured policy maps 291
Modify Modifies the name of a policy map 291
Add Rule Sets the boundary parameters used for monitoring inbound traffic,
and the action to take for conforming and non-conforming traffic
291
Show Rule Shows the rules used to enforce bandwidth policing for a policy
map
291
Configure Interface Applies a policy map to an ingress port 301
Table 6: Switch Main Menu (Continued)
Menu Description Page