LevelOne User Manual HVE-9005 HDMI over Cat.
Safety and Notice The HVE-9005 HDMI Extender over Cat.5 Extender Kit has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, the HVE-9005 should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit. ● Follow all instructions and warnings marked on this unit.
INTRODUCTION The HVE-9005 HDMI Extender over Cat.5 Extender Kit boosts up your video/audio transmission distance up to 60m (198ft) in HDTV 1080p with 48-bit color depth. HVE-9005 also supports the most advanced 3D video format complaint with HDMI specification and therefore guarantees the highest 3D video compatibility on the market. With only one cost effective Cat.
SPECIFICATIONS HDMI over Cat.5 Extender Kit HVE-9005T HVE-9005R HDMI over Cat.5 Transmitter HDMI over Cat.5 Receiver HDMI Deep Color, full 3D & 4K2K@30 Yes Single-link 340MHz [10.2Gbps] 480i / 480p / 720p / 1080i / 1080p60 1080p@60 60m (198ft) [CAT5e] Surround sound [up to 7.1ch) or stereo digital audio Auto 1.
PACKAGE CONTENTS ● HVE-9005 ● IR blaster x 2 ● IR receiver x 2 ● Power Adapter x 2 ● User Manual CONNECTION DIAGRAM 3
PANEL DESCRIPTIONS Transmitter ► HVE-9005T Front Panel 1. Latch-locking power jack: Connect to 5V DC power supply 2. LED: Power indicator 3. HDMI IN: Connects to a HDMI source with a HDMI male-male cable 4. IR Blaster: Infrared 3.5mm socket for plugging in the extension cable of IR blaster 5. IR Receiver: Infrared 3.5mm socket for plugging in the extension cable of IR receiver Rear Panel 6. Mini-USB: F/W update 7. LED: T/R link indicator 8.
Receiver ► HVE-9005R Front Panel 9. Latch-locking power jack: Connect to 5V DC power supply 10. LED: Power indicator 11. HDMI OUT: Connect to a HDMI display with a HDMI male-male cable 12. IR Blaster: Infrared 3.5mm socket for plugging in the extension cable of IR blaster 13. IR Receiver: Infrared 3.5mm socket for plugging in the extension cable of IR receiver Rear Panel 14. Mini-USB: F/W update 15. LED: T/R link indicator 16.
IR PASS-THROUGH IR Extenders IR Blaster IR Receiver IR Sockets IR BLASTER: plug in the IR blaster to emit all IR command signals received from the IR receiver from the other end to control the devices corresponding to the IR signals. IR RECEIVER: plug in the IR receiver to receive all IR command signals from the IR remote controls of the corresponding devices. CAUTION! Incorrect placement of IR Blaster and Receiver may result in the failure of the IR extenders.
HDMI PIN DEFINITION Type A (Receptacle) HDMI Pin 1 TMDS Data2+ Pin 11 TMDS Clock Shield Pin 2 TMDS Data2 Shield Pin 12 TMDS Clock– Pin 3 TMDS Data2– Pin 13 CEC Pin 4 TMDS Data1+ Pin 14 Reserved (N.C. on device) Pin 5 TMDS Data1 Shield Pin 15 SCL Pin 6 TMDS Data1– Pin 16 SDA Pin 7 TMDS Data0+ Pin 17 DDC/CEC Ground Pin 8 TMDS Data0 Shield Pin 18 +5V Power Pin 9 TMDS Data0– Pin 19 Hot Plug Detect Pin 10 TMDS Clock+ HARDWARE INSTALLATION 1.
NOTICE 1. All HDMI over CAT5 transmission distances are measured using Belden 1583A CAT5e 125MHz UTP cable and ASTRODESIGN Video Signal Generator VG-859C & VG-870B. 2. Incorrect placement of IR Blaster and Receiver may result in the failure of the IR extenders. Please check carefully before plugging in the IR extender to the respective IR sockets. Warranty will not cover the damage. 3.
WARRANTY The SELLER warrants the HVE-9005 HDMI Extender over Cat.5 Extender Kit free from defects in the material and workmanship for 1 year from the date of purchase from the SELLER or an authorized dealer. Should this product fail to be in good working order within 1 year warranty period, The SELLER, at its option, repair or replace the unit, provided that the unit has not been subjected to accident, disaster, abuse or any unauthorized modifications including static discharge and power surge.
