HDSpider™ HDMI 1.3 over Single Cat.5 Distribution Series HVE-9000 HVE-9001 HVE-9002 HVE-9003 HVE-9004 HVE-9008 HVE-9900 User Manual Ver.:2.
TABLE OF CONTENTS p.2 Package Contents p.3 Overview p.4 Panel Description p.14 Installation p.20 Systematic Application Diagrams p.21 Frequently Asked Questions p.22 Specifications p.25 Notice p.
PACKAGE CONTENTS HVE-9000 HDSpider™ Long Range Cat.5 HDMI Receiver 1. HDSpider™ Long Range Cat.5 HDMI Receiver (HVE-9000) 2. 5V 2A DC Power Supply Unit 3. User Manual HVE-9001 HDSpider™ Cat.5 HDMI Sender 1. HDSpider™ Cat.5 HDMI Sender (HVE-9001) 2. 5V 2A DC Power Supply Unit 3. User Manual HVE-9002 HDSpider™ Cat.5 HDMI Sender with Local HDMI Output 1. HDSpider™ Cat.5 HDMI Sender with Local HDMI Output (HVE-9002) 2. 5V 4A DC Power Supply Unit 3. User Manual HVE-9003 HDSpider™ Cat.
OVERVIEW Introduction The HDSpider™ HDMI 1.3 over Single Cat.5 Distribution Series provides the most flexible solution by which the uncompressed, unmodified, and pure digital HDMI signals with 7.1-channel audio can be transmitted to different locations over a long distance. The cascadability of HDSpider™ series is virtually unlimited, allowing you to extend HDMI/DVI displays almost anywhere. The whole HDSpider™ series products can be easily inter-connected to suit almost every application through Cat.
PANEL DESCRIPTION HVE-9000 HDSpider™ Long Range Cat.5 HDMI Receiver Input Panel HDMI Signal IN: Connect to the HDMI Signal OUT port on the HVE-9001, HVE-9002, HVE-9004, or HVE-9008 with a Cat.5e/6 cable. +5V DC: Connect to 5V 2A DC power supply. Output Panel Signal Level: Adjust the 8-level signal equalization control to the received HDMI signals. The HDMI signal level varies from 0 (strongest) to 7 (weakest) for respective transmission length from longest possible range to short distance.
HVE-9001 HDSpider™ Cat.5 HDMI Sender Output Panel HDMI IN: Connect to a HDMI source with a HDMI male-male cable Mode: 0 = HDMI mode with surround sound (up to 7.1ch) audio output 1 = HDMI mode with stereo (2ch) audio output 2 = DVI mode 3 ~ 5 = Not in use 6 = Use default EDID profile 7 = Learn the EDID from the display* Note for EDID (Extended Display Identification Data) learning 1.
HVE-9002 HDSpider™ Cat.5 HDMI Sender with Local HDMI Output 1 2 3 4 5 6 7 1. Input video format indicator [lights up for HDMI signal, lights off for DVI signal] 2. DIP switch [see table below] 3. HDMI IN: Connect a HDMI source with a HDMI male-male cable here 4. Audio OUT: Plug in a local speaker here 5. HDMI OUT: Local HDMI for connecting to a HDMI display with a HDMI male-male cable here or cascade to the HDMI IN of another HVE-9001, HVE-9002, HVE-9004, or HVE-9008. 6.
Note for EDID (Extended Display Identification Data) learning 1. Don’t plug in HDMI cable to [HDMI In] when you want to restore default EDID or learn the display’s EDID. 2. Please connect the display which you want to read EDID to HDMI OUT so the HVE-9002 can learn the EDID information from the connected HDTV. 3. To learn EDID from HDMI display, pull up-and-down the DIP switch 1 from OFF to ON, the green light will dim and light to indicate the EDID learning process is complete.
HVE-9003 HDSpider™ Cat.5 Cascadable HDMI Sender 1 2 3 4 5 6 7 1. Input video format indicator [lights up for HDMI signal, lights off for DVI signal] 2. Signal Level: Adjust the 16-level equalization control corresponding to the transmission distance of receiving HDMI signals. For surround sound audio output, please adjust from 0-to-7 (longest-to-shortest transmission length). For stereo audio output, please adjust from 8-to-F (longest-to-shortest transmission length).
HVE-9004 HDSpider™ 4-Port Cat.5 HDMI Sender DIP Switch: Please see more detail in the table below HDMI INPUT: Connect to a HDMI source HDMI Signal OUTPUT 1 – 4: Link to each HDMI display via a Cat.5e/6 cable with HVE-9000, HVE-9003, or HVE-9900.
Note for DIP switch 1 If the HDTV shows video but without audio, please set audio mode to stereo. 2 Factory default setting is pin-1 at OFF [©], pin-2 at OFF [©] for 1080p with stereo. 3 If you encounter any unsolved audio/video output problem during system installation, please dial the DIP switch to pin-1 at OFF [©], pin-2 at ON [ª] for safe mode to enforce the most compatible 720p stereo output for system check.
HVE-9008 1 HDSpider™ 8-Port Cat.5 HDMI Sender with Local HDMI Output 2 3 5 4 1. +5V DC: Connect to a 5V DC power supply unit 2. HDMI IN: Connect to a HDMI source 3. HDMI OUT: Connect to a HDMI display for local monitoring or cascade to another HDMI sender (HVE-9001, HVE-9004, or HVE-9008) 4. MODE: 0 = [Video] – supports up to HDMI 1.3 output. [Audio] – supports up to 7.1ch output 1 = [Video] – supports up to HDMI 1.3 output. [Audio] – locks to stereo audio output 2 = [Video] – locks to HDMI 1.
2. For desirable 1080p video output, please follow the instructions below: Step 1 – Please set the rotary arrow at Mode 6 for Default Mode, and wait for the green LED SIGNAL on the front panel to blink for a couple seconds. Step 2 – Please dial the rotary arrow clockwise [3] from Mode 6 to Mode 1. If you can get audio/video from the display, you can stay tune at this setting for 1080p and stereo audio. If you need to get 1080p with 7.
HVE-9900 HDSpider™ Short Range Cat.5 HDMI Receiver RJ-45 socket: Link from HVE9001, HVE-9002, HVE-9003, HVE-9004, HVE-9008 or HVE-9900 with a Cat.5e/6 cable HDMI socket: Connect to a local HDMI display or projector, or the HDMI output of HVE-9002 or HVE-9003 for HDMI over Cat.
INSTALLATION Extends HDMI signals to one display at longer distance HVE-9000 & HVE-9001 1. Connect HVE-9001 to a HDMI source device with a HDMI cable. 2. Connect HVE-9000 to a HDMI display or projector with a HDMI cable. 3. Connect a Cat.5e/6 cable between HVE-9000 and HVE-9001. 4. Make sure this Cat.5e/6 cable is tightly connected and not loose. 5. Plug in a 5V DC power supply unit to the power jack of HVE-9000. 6. Plug in another 5V DC power supply unit to the power jack of HVE-9001. 7.
Extends HDMI signals to one display at shorter distance HVE-9900 & HVE-9001 1. Connect HVE-9001 to a HDMI source with a HDMI cable. 2. Connect HVE-9900 directly to your HDMI display or projector. 3. Connect one Cat.5e/6 cable between HVE-9001 and HVE-9900. 4. Make sure this Cat.5e/6 cable is tightly connected and not loose. 5. Plug in the 5V DC power supply unit to the power jack of HVE-9001. HDMI source HDMI cable HVE-9001 HDTV HVE-9900 Cat.
Extends HDMI signals to next cascading device with one local display HVE-9002 1. Switch off all devices, including displays. 2. Connect a local HDMI display to the HDMI out of the HVE-9002 and then connect a speaker to the 3.5mm audio socket. 3. Connect to a HDMI source (such as a Blu-Ray Disc player) 4. Connect HVE-9002 to HVE-9003 (for cascading), to HVE-9000 (to HDTV at long range), or HVE-9900 (to HDTV at mid range) via RJ-45 Out by a Cat.5e cable. 5. Plug in 5V4A DC power supply unit. 6.
Relays HDMI signals to next cascading device with one local display HVE-9003 1. Switch off all devices, including displays. 2. Connect a local HDMI display to the HDMI Out of the HVE-9003 and then connect a speaker to the 3.5mm audio socket. 3. Connect to HVE-9003 via RJ-45 in by a Cat.5e cable. 4. Connect to next HVE-9003 (for cascading), to HVE-9000 (to HDTV at long range), or HVE-9900 (to HDTV at mid range) via RJ-45 out by a Cat.5e cable. 5. Plug in 5V4A DC power supply. 6. Power on the HDTV.
Broadcasts HDMI signals to 4 remote displays from one video source HVE-9004 1. Switch off all devices, including displays. 2. Connect a HDMI source device to the HDMI INPUT port. 3. Connect the HVE-9000 and/or HVE-9900 as receivers via solid Cat.5e/6 cables to each HDMI Signal OUTPUT port. 4. Plug in the interlocking 5V 4A DC power supply unit. 5. Power on the HDMI displays. 6. Power on the HDMI sources. HDMI source HDMI cable HVE-9004 Cat.5e/6 cable up to 60m (200ft) Cat.
Broadcasts HDMI signals to 8 remote displays from one video source HVE-9008 1. Switch off all devices, including displays. 2. Connect a HDMI source device to the HDMI INPUT port. 3. Connect the HVE-9000 and/or HVE-9900 as receivers via solid Cat.5e/6 cables to each HDMI Signal OUTPUT port. 4. Plug in the interlocking 5V 4A DC power supply unit. 5. Power on the HDMI displays. 6. Power on the HDMI sources. HDMI source HDMI cable HVE-9008 Cat.5e/6 cable up to 25m (80ft) Cat.
SYSTEMATIC APPLICATION DIAGRAM HVE-9002 & HVE-9003 with HVE-9000 & HVE-9900 HDMI source HDMI cable HDTV Speaker HVE-9002 Audio cable HDMI cable HDTV Cat.5e cable Speaker HVE-9003 Audio cable HDMI cable Cat.5e cable HDTV HVE-9003 Speaker Audio cable Cat.5e cable HVE-9000 Cat.
FREQUENTLY ASKED QUESTIONS How does equalizer (EQ) work? Equalizer is a built in electronic device used to fine tune picture quality. Please turn knob anticlockwise from 7 to 0 to get the optimal vision. If you find the display is not showing properly, please check your cable connection or it is out transmission limit. What is the minimum requirement of Cat-X cable Minimum cable requirement is Category 5 cable for HDSpider™ series products.
SPECIFICATIONS Model Name Technical Role of usage HVE-9001 HVE-9004 HVE-9008 Extender 1x4 splitter 1x9 splitter Transmitter [TX] HDMI compliance HDMI 1.3c HDCP compliance Yes Video bandwidth Single-link 225MHz [6.
Model Name HVE-9002 HVE-9003 Technical Role of usage 1x2 distribution amplifier (splitter) Transmitter [TX] Transceiver [TRX] HDMI compliance HDMI 1.3c HDCP compliance Yes Video bandwidth Single-link 225MHz [6.
Model Name HVE-9000 HVE-9900 Long range receiver [RX] Short range receiver [RX] Technical Role of usage HDMI compliance HDMI 1.3c HDCP compliance Yes Video bandwidth Single-link 225MHz [6.
NOTICE 1. Please read user manual carefully before operating the device. 2. Please use the power supply unit accompanied with this product. Warranty does not cover for damages caused by pairing other power adaptor. 3. Please check all connecting devices are properly grounded to avoid electric failure. 4. This product has limited warranty for one year from defects in material and workmanship. Items that are physically damaged, misused, tempered with or altered are void of warranty.
PIN DEFINITION HDMI Pin 1 TMDS Data2+ Pin 8 TMDS Data0 Shield Pin 15 SCL Pin 2 TMDS Data2 Shield Pin 9 TMDS Data0– Pin 16 SDA Pin 3 TMDS Data2– Pin 10 TMDS Clock+ Pin 17 DDC/CEC Ground Pin 4 TMDS Data1+ Pin 11 TMDS Clock Shield Pin 18 +5 V Power Pin 5 TMDS Data1 Shield Pin 12 TMDS Clock– Pin 19 Hot Plug Detect Pin 6 TMDS Data1– Pin 13 CEC Pin 7 TMDS Data0+ Pin 14 Reserved (N.C.
27
