IES-0842 4 x 802.3at PoE + 4 FE Web Smart Switch -10 to 60C, DIN-rail User Manual v1.
Preface This manual describes how to install and use the Industrial Web-Smart PoE & High Power PoE Ethernet Switch. This switch introduced here is designed to deliver full scalability with web-based management functions. Capable of operating at temperature extremes of -40°C to +75°C, this is the switch of choice for harsh environments constrained by space. Port 1 to port 4 on this switch supports IEEE802.3af Power over Ethernet (PoE) Power Sourcing Equipment (PSE) and can detect an IEEE802.
Table of Contents OVERVIEW ........................................................................................................................... 4 INDUSTRIAL WEB-SMART POE ETHERNET SWITCH .............................................................................................4 FEATURES ...............................................................................................................................................................5 PACKAGE CONTENTS ....................................
Overview Industrial Web-Smart PoE Ethernet Switch LevelOne IES-0842 Industry Ethernet Switch provides 4 PoE ports of 10/100Base-TX plus 4 ports of 10/100Base-TX Ethernet to enable high speed network at mission-critical environment. This device is designed to be mounted on an industry standard DIN-rail, plus the clearly visible status LEDs provide simple monitoring of port link activity.
Features Complies with EN61000-6-2 & EN61000-6-3 EMC Generic standard immunity for Industrial environment. Manageable via Web browser interface. Supports IEEE802.3af Power over Ethernet (PoE) Power Sourcing Equipment (PSE). High Power PoE design up to 30W (enhancement of IEEE802.3af PoE). Supports IEEE802.3/802.3u/802.3x. Auto-negotiation: 10/100Mbps-full/half-duplex; Auto MDI/MDIX. 100Base-FX: Multi mode SC or ST type, Single mode SC or ST type.
Front Panel Display LED PW 1,2,3 Status Description Steady Power On Off Power Off 10/100Base-TX or 100Base-FX/BX LNK/ACT PoE (High Power) Steady Network connection is established Flashing Transmitting or Receiving data Steady Power Device (PD) is connected Off Power Device (PD) is disconnected 6
Power Input PW1 Terminal Block PW2 + 48VDC Power Ground + 48VDC Power Ground Earth Ground Relay Output 0.1A @ 24VDC *Warning signal disable for following: DC Jack 1. The relay contact closes if Power1 and Power2 are both failed but Power3 on. 2. The relay contact closes if Power3 is failed but Power1 and Power2 are both on. PW3 DC Jack 48VDC Special Note: The relay output is normal open position when there is no power to the switch.
DIN rain Mount Fix the DIN rail attachment plate to the back panel of the switch. Installation: Place the switch on the DIN rail from above using the slot. Push the front of the switch toward the mounting surface until it audibly snaps into place. Removal: Pull out the lower edge and then remove the switch from the DIN rail.
10/100Base-TX Connector The following lists the pin-out of 10/100Base-TX ports.
Web Management The switch provides a browser interface that lets you configure and manage the switch remotely. applications directly in your web browser by entering the IP address of the switch. You can then use your web browser to list and manage switch configuration parameters from one central Web-Based Browser Management The switch provides a web-based browser interface for configuring and managing the switch. This interface allows you to access the switch using a preferred web browser.
Logging on to the switch Switch IP Address In your web browser, specify the IP address of the switch. Default IP address is 192.168.1.10. User name Enter the factory default user name: admin. Password Enter the factory default password (no password). Or enter a user-defined password if you followed the instructions later and changed the factory default password. OK switch.
Browser Interface The web browser interface provides groups of point-and-click buttons at the left field of the screen for configuring and managing the switch.
PoE PoE 1. System power budget: System power budget and type a new system power budget. 2. OK: OK button to update your settings. 3. Enable mode: C Enable mode drop-down menu to choose Enable or Disable Enable mode drop-down list to enable or disable Port 1 ~ Port 4 to discover Powered Device (PD) connected to Port 1 ~ Port 4 of the Switch. 4.
High Power PoE Operation This Industrial Web-Smart PoE & High Power PoE Ethernet switch is compliant with the 802.3af and 802.3at High Power standard, providing 30W of pure power to power demanding devices such as pan-tilt-zoom (PTZ) network cameras, wireless access bridge/routers and large-screen network video phones et cetera. This 802.3af High Power switch s PoE operation with 802.3at based PD is highly versatile and adaptable. Normally, when an 802.3at PD is connected to an 802.
Port Based VLAN Port Based VLAN 1. VLAN.1 ~ VLAN.7: Click and choose Port 1 ~ Port 8 to be added into VLAN.1 ~ VLAN.7. 2. Cancel: Cancel button to cancel your settings. 3. OK: OK button to update your settings.
Priority Priority 1. Ratio Scheme: Click and choose All High Before Low , 10:1 , 5:1 , or 2:1 ratio scheme. 2. Port 1 ~ Port 8: Click and choose TOS , 802.1p , or Port Priority ( High or Low ) for Port 1 ~ Port 8. 3. 802.1p Level 7 ~ Level 0: Click and set High or Low priority to queue of 802.1p Level 7 ~ Level 0. 4. Cancel: Cancel button to cancel your settings. 5. OK: OK button to update your settings.
Diff Serv Code Point Diff Serv Code Point Bit 0 ~ 31: 1. Diff Serv Code Point: Check and set Bit 0 ~ 31 of Diff Serv Code Point to high priority. 2. Cancel: Cancel button to cancel your settings. 3. OK: OK button to update your settings. Bit 32 ~ 63: 1. Diff Serv Code Point: Check and set Bit 32 ~ 63 of Diff Serv Code Point to high priority. 2. Cancel: Cancel button to cancel your settings. 3. OK: OK button to update your settings.
System Setup System Setup System Configuration: 1. DHCP Client: Click and choose Enable or Disable to enable or disable the Switch as DHCP client to be automatically supplied an IP address, gateway address, and subnet mask from DHCP server. 2. IP Address: C IP Address text box and type a new address to change the IP Address. 3. Subnet Mask: C Subnet Mask text box and type a new address to change the Subnet Mask. 4.
Firmware Upgrade Firmware Update 1. Cancel: C Cancel button to cancel firmware update request. 2. Update: C Update button and wait for firmware update request being processed.
Specifications Applicable Standards Switching Method Forwarding Rate 10Base-T 100Base-TX 100Base-FX/BX Performance Cable 10Base-T 100Base-TX 100Base-FX 100Base-BX LED Indicators Dimensions Net Weight Power Input Operating Voltage & Max. Current Consumption Power Consumption Operating Temperature Storage Temperature Humidity EMI EMS Environmental Test Compliance IEEE802.3 10Base-T IEEE802.
